From be1c2fbb7ae15b3b5276439e6c9aff9d1c4392d5 Mon Sep 17 00:00:00 2001
From: DanB <danb@cgrates.org>
Date: Mon, 5 Aug 2013 11:39:26 +0200
Subject: [PATCH] Adding freeswitch autoload_configs folder to automatically
 support json_cdr

---
 .../autoload_configs/abstraction.conf.xml     |   5 +
 .../conf/autoload_configs/acl.conf.xml        |  32 +
 .../conf/autoload_configs/alsa.conf.xml       |  12 +
 .../conf/autoload_configs/blacklist.conf.xml  |  11 +
 .../conf/autoload_configs/callcenter.conf.xml |  38 ++
 .../conf/autoload_configs/cdr_csv.conf.xml    |  23 +
 .../autoload_configs/cdr_mongodb.conf.xml     |  13 +
 .../conf/autoload_configs/cdr_pg_csv.conf.xml |  40 ++
 .../conf/autoload_configs/cdr_sqlite.conf.xml |  18 +
 .../conf/autoload_configs/cepstral.conf.xml   |  12 +
 .../conf/autoload_configs/cidlookup.conf.xml  |  33 ++
 .../conf/autoload_configs/conference.conf.xml | 213 +++++++
 .../conf/autoload_configs/console.conf.xml    |  56 ++
 .../conf/autoload_configs/db.conf.xml         |   5 +
 .../dialplan_directory.conf.xml               |   9 +
 .../conf/autoload_configs/dingaling.conf.xml  |   9 +
 .../conf/autoload_configs/directory.conf.xml  |  21 +
 .../autoload_configs/distributor.conf.xml     |  10 +
 .../conf/autoload_configs/easyroute.conf.xml  |  28 +
 .../conf/autoload_configs/enum.conf.xml       |  21 +
 .../autoload_configs/erlang_event.conf.xml    |  23 +
 .../autoload_configs/event_multicast.conf.xml |  14 +
 .../autoload_configs/event_socket.conf.xml    |   9 +
 .../conf/autoload_configs/fax.conf.xml        |  12 +
 .../conf/autoload_configs/fifo.conf.xml       |  10 +
 .../conf/autoload_configs/hash.conf.xml       |   6 +
 .../conf/autoload_configs/httapi.conf.xml     | 127 ++++
 .../conf/autoload_configs/http_cache.conf.xml |  10 +
 .../conf/autoload_configs/ivr.conf.xml        |   5 +
 .../conf/autoload_configs/java.conf.xml       |   8 +
 .../conf/autoload_configs/json_cdr.conf.xml   |  51 ++
 .../conf/autoload_configs/lcr.conf.xml        |  89 +++
 .../autoload_configs/local_stream.conf.xml    |  49 ++
 .../conf/autoload_configs/logfile.conf.xml    |  29 +
 .../conf/autoload_configs/lua.conf.xml        |  30 +
 .../conf/autoload_configs/memcache.conf.xml   |   6 +
 .../conf/autoload_configs/modules.conf.xml    | 134 +++++
 .../conf/autoload_configs/mongo.conf.xml      |  20 +
 .../conf/autoload_configs/nibblebill.conf.xml |  50 ++
 .../conf/autoload_configs/opal.conf.xml       |  21 +
 .../conf/autoload_configs/oreka.conf.xml      |  13 +
 .../conf/autoload_configs/osp.conf.xml        |  53 ++
 .../conf/autoload_configs/perl.conf.xml       |  16 +
 .../autoload_configs/pocketsphinx.conf.xml    |  12 +
 .../conf/autoload_configs/portaudio.conf.xml  | 218 +++++++
 .../post_load_modules.conf.xml                |   4 +
 .../autoload_configs/presence_map.conf.xml    |   7 +
 .../conf/autoload_configs/python.conf.xml     |  16 +
 .../conf/autoload_configs/redis.conf.xml      |   7 +
 .../conf/autoload_configs/rss.conf.xml        |   7 +
 .../conf/autoload_configs/rtmp.conf.xml       |  17 +
 .../autoload_configs/sangoma_codec.conf.xml   |  37 ++
 .../conf/autoload_configs/shout.conf.xml      |   8 +
 .../conf/autoload_configs/skinny.conf.xml     |   6 +
 .../conf/autoload_configs/sofia.conf.xml      |  19 +
 .../conf/autoload_configs/spandsp.conf.xml    | 113 ++++
 .../autoload_configs/spidermonkey.conf.xml    |   8 +
 .../conf/autoload_configs/switch.conf.xml     | 168 ++++++
 .../conf/autoload_configs/syslog.conf.xml     |  18 +
 .../conf/autoload_configs/timezones.conf.xml  | 551 ++++++++++++++++++
 .../autoload_configs/tts_commandline.conf.xml |  15 +
 .../conf/autoload_configs/unicall.conf.xml    |  25 +
 .../conf/autoload_configs/unimrcp.conf.xml    |  23 +
 .../conf/autoload_configs/voicemail.conf.xml  |  70 +++
 .../autoload_configs/voicemail_ivr.conf.xml   | 211 +++++++
 .../conf/autoload_configs/xml_cdr.conf.xml    |  71 +++
 .../conf/autoload_configs/xml_curl.conf.xml   |  49 ++
 .../conf/autoload_configs/xml_rpc.conf.xml    |  10 +
 .../conf/autoload_configs/xml_scgi.conf.xml   |  12 +
 .../conf/autoload_configs/zeroconf.conf.xml   |   6 +
 docs/tutfreeswitch.rst                        |   2 +-
 71 files changed, 3103 insertions(+), 1 deletion(-)
 create mode 100644 data/freeswitch/conf/autoload_configs/abstraction.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/acl.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/alsa.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/blacklist.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/callcenter.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cdr_csv.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cdr_mongodb.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cdr_pg_csv.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cdr_sqlite.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cepstral.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/cidlookup.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/conference.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/console.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/db.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/dialplan_directory.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/dingaling.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/directory.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/distributor.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/easyroute.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/enum.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/erlang_event.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/event_multicast.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/event_socket.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/fax.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/fifo.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/hash.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/httapi.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/http_cache.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/ivr.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/java.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/json_cdr.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/lcr.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/local_stream.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/logfile.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/lua.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/memcache.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/modules.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/mongo.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/nibblebill.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/opal.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/oreka.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/osp.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/perl.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/pocketsphinx.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/portaudio.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/post_load_modules.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/presence_map.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/python.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/redis.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/rss.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/rtmp.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/shout.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/skinny.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/sofia.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/spandsp.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/spidermonkey.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/switch.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/syslog.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/timezones.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/tts_commandline.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/unicall.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/unimrcp.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/voicemail.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/voicemail_ivr.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/xml_cdr.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/xml_curl.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/xml_rpc.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/xml_scgi.conf.xml
 create mode 100644 data/freeswitch/conf/autoload_configs/zeroconf.conf.xml

diff --git a/data/freeswitch/conf/autoload_configs/abstraction.conf.xml b/data/freeswitch/conf/autoload_configs/abstraction.conf.xml
new file mode 100644
index 000000000..d4b1dfd27
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/abstraction.conf.xml
@@ -0,0 +1,5 @@
+<configuration name="abstraction.conf" description="Abstraction">
+<apis>
+	<api name="user_name" description="Return Name for extension" syntax="<exten>" parse="(.*)" destination="user_data" argument="$1@default var effective_caller_id_name"/>
+</apis>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/acl.conf.xml b/data/freeswitch/conf/autoload_configs/acl.conf.xml
new file mode 100644
index 000000000..0c117d07b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/acl.conf.xml
@@ -0,0 +1,32 @@
+<configuration name="acl.conf" description="Network Lists">
+  <network-lists>
+    <!-- 
+	 These ACL's are automatically created on startup.
+
+	 rfc1918.auto  - RFC1918 Space
+	 nat.auto      - RFC1918 Excluding your local lan.
+	 localnet.auto - ACL for your local lan.
+	 loopback.auto - ACL for your local lan.
+    -->
+
+    <list name="lan" default="allow">
+      <node type="deny" cidr="192.168.42.0/24"/>
+      <node type="allow" cidr="192.168.42.42/32"/>
+    </list>
+
+    <!--
+	This will traverse the directory adding all users 
+	with the cidr= tag to this ACL, when this ACL matches
+	the users variables and params apply as if they 
+	digest authenticated.
+    -->
+    <list name="domains" default="deny">
+      <!-- domain= is special it scans the domain from the directory to build the ACL -->
+      <node type="allow" domain="$${domain}"/>
+      <!-- use cidr= if you wish to allow ip ranges to this domains acl. -->
+      <!-- <node type="allow" cidr="192.168.0.0/24"/> -->
+    </list>
+
+  </network-lists>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/alsa.conf.xml b/data/freeswitch/conf/autoload_configs/alsa.conf.xml
new file mode 100644
index 000000000..e589acaac
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/alsa.conf.xml
@@ -0,0 +1,12 @@
+<configuration name="alsa.conf" description="Soundcard Endpoint">
+  <settings>
+    <!--Default dialplan and caller-id info -->
+    <param name="dialplan" value="XML"/>
+    <param name="cid-name" value="N800 Alsa"/>
+    <param name="cid-num" value="5555551212"/>
+
+    <!--audio sample rate and interval -->
+    <param name="sample-rate" value="8000"/>
+    <param name="codec-ms" value="20"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/blacklist.conf.xml b/data/freeswitch/conf/autoload_configs/blacklist.conf.xml
new file mode 100644
index 000000000..a981ebbdb
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/blacklist.conf.xml
@@ -0,0 +1,11 @@
+<configuration name="mod_blacklist.conf" description="Blacklist module">
+<lists>
+	<!--
+		Example blacklist, the referenced file contains blacklisted items, one entry per line
+
+		NOTE: make sure the file exists and is readable by FreeSWITCH.
+
+	<list name="example" filename="/usr/local/freeswitch/conf/blacklists/example.list"/>
+	-->
+</lists>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/callcenter.conf.xml b/data/freeswitch/conf/autoload_configs/callcenter.conf.xml
new file mode 100644
index 000000000..a069413ac
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/callcenter.conf.xml
@@ -0,0 +1,38 @@
+<configuration name="callcenter.conf" description="CallCenter">
+  <settings>
+    <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->
+    <!--<param name="dbname" value="/dev/shm/callcenter.db"/>-->
+  </settings>
+
+  <queues>
+
+    <queue name="support@default">
+      <param name="strategy" value="longest-idle-agent"/>
+      <param name="moh-sound" value="$${hold_music}"/>
+      <!--<param name="record-template" value="$${base_dir}/recordings/${strftime(%Y-%m-%d-%H-%M-%S)}.${destination_number}.${caller_id_number}.${uuid}.wav"/>-->
+      <param name="time-base-score" value="system"/>
+      <param name="max-wait-time" value="0"/>
+      <param name="max-wait-time-with-no-agent" value="0"/>
+      <param name="max-wait-time-with-no-agent-time-reached" value="5"/>
+      <param name="tier-rules-apply" value="false"/>
+      <param name="tier-rule-wait-second" value="300"/>
+      <param name="tier-rule-wait-multiply-level" value="true"/>
+      <param name="tier-rule-no-agent-no-wait" value="false"/>
+      <param name="discard-abandoned-after" value="60"/>
+      <param name="abandoned-resume-allowed" value="false"/>
+    </queue>
+
+  </queues>
+
+<!-- WARNING: Configuration of XML Agents will be updated into the DB upon restart. -->
+<!-- WARNING: Configuration of XML Tiers will reset the level and position if those were supplied. -->
+<!-- WARNING: Agents and Tiers XML config shouldn't be used in a multi FS shared DB setup (Not currently supported anyway) -->
+  <agents>
+    <!--<agent name="1000@default" type="callback" contact="[call_timeout=10]user/1000@default" status="Available" max-no-answer="3" wrap-up-time="10" reject-delay-time="10" busy-delay-time="60" />-->
+  </agents>
+  <tiers>
+    <!-- If no level or position is provided, they will default to 1.  You should do this to keep db value on restart. -->
+    <!-- <tier agent="1000@default" queue="support@default" level="1" position="1"/> -->
+  </tiers>
+
+</configuration> 
diff --git a/data/freeswitch/conf/autoload_configs/cdr_csv.conf.xml b/data/freeswitch/conf/autoload_configs/cdr_csv.conf.xml
new file mode 100644
index 000000000..8d796c68f
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cdr_csv.conf.xml
@@ -0,0 +1,23 @@
+<configuration name="cdr_csv.conf" description="CDR CSV Format">
+  <settings>
+    <!-- 'cdr-csv' will always be appended to log-base -->
+    <!--<param name="log-base" value="/var/log"/>-->
+    <param name="default-template" value="example"/>
+    <!-- This is like the info app but after the call is hung up -->
+    <!--<param name="debug" value="true"/>-->
+    <param name="rotate-on-hup" value="true"/>
+    <!-- may be a b or ab -->
+    <param name="legs" value="a"/>
+	<!-- Only log in Master.csv -->
+	<!-- <param name="master-file-only" value="true"/> -->
+  </settings>
+  <templates>
+    <template name="sql">INSERT INTO cdr VALUES ("${caller_id_name}","${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}","${uuid}","${bleg_uuid}", "${accountcode}");</template>
+    <template name="example">"${caller_id_name}","${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}","${uuid}","${bleg_uuid}","${accountcode}","${read_codec}","${write_codec}"</template>
+    <template name="snom">"${caller_id_name}","${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}","${uuid}","${bleg_uuid}", "${accountcode}","${read_codec}","${write_codec}","${sip_user_agent}","${call_clientcode}","${sip_rtp_rxstat}","${sip_rtp_txstat}","${sofia_record_file}"</template>
+    <template name="linksys">"${caller_id_name}","${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}","${uuid}","${bleg_uuid}","${accountcode}","${read_codec}","${write_codec}","${sip_user_agent}","${sip_p_rtp_stat}"</template>
+    <template name="asterisk">"${accountcode}","${caller_id_number}","${destination_number}","${context}","${caller_id}","${channel_name}","${bridge_channel}","${last_app}","${last_arg}","${start_stamp}","${answer_stamp}","${end_stamp}","${duration}","${billsec}","${hangup_cause}","${amaflags}","${uuid}","${userfield}"</template>
+    <template name="opencdrrate">"${uuid}","${signal_bond}","${direction}","${ani}","${destination_number}","${answer_stamp}","${end_stamp}","${billsec}","${accountcode}","${userfield}","${network_addr}","${regex('${original_caller_id_name}'|^.)}","${sip_gateway_name}"</template>
+  </templates>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/cdr_mongodb.conf.xml b/data/freeswitch/conf/autoload_configs/cdr_mongodb.conf.xml
new file mode 100644
index 000000000..ce366d1bd
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cdr_mongodb.conf.xml
@@ -0,0 +1,13 @@
+<configuration name="cdr_mongodb.conf" description="MongoDB CDR logger">
+  <settings>
+    <!-- Hostnames and IPv6 addrs not supported (yet) -->
+    <param name="host" value="127.0.0.1"/>
+    <param name="port" value="27017"/>
+
+    <!-- Namespace format is database.collection -->
+    <param name="namespace" value="test.cdr"/>
+
+    <!-- If true, create CDR for B-leg of call (default: true) -->
+    <param name="log-b-leg" value="false"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/cdr_pg_csv.conf.xml b/data/freeswitch/conf/autoload_configs/cdr_pg_csv.conf.xml
new file mode 100644
index 000000000..4fec817b4
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cdr_pg_csv.conf.xml
@@ -0,0 +1,40 @@
+<configuration name="cdr_pg_csv.conf" description="CDR PG CSV Format">
+  <settings>
+    <!-- See parameters for PQconnectdb() at http://www.postgresql.org/docs/8.4/static/libpq-connect.html -->
+    <param name="db-info" value="host=localhost dbname=cdr connect_timeout=10" />
+    <!-- CDR table name -->
+    <!--<param name="db-table" value="cdr"/>-->
+
+    <!-- Log a-leg (a), b-leg (b) or both (ab) -->
+    <param name="legs" value="a"/>
+
+    <!-- Directory in which to spool failed SQL inserts -->
+    <!-- <param name="spool-dir" value="$${base_dir}/log/cdr-pg-csv"/> -->
+    <!-- Disk spool format if DB connection/insert fails - csv (default) or sql -->
+    <param name="spool-format" value="csv"/>
+    <param name="rotate-on-hup" value="true"/>
+
+    <!-- This is like the info app but after the call is hung up -->
+    <!--<param name="debug" value="true"/>-->
+  </settings>
+  <schema>
+    <field var="local_ip_v4"/>
+    <field var="caller_id_name"/>
+    <field var="caller_id_number"/>
+    <field var="destination_number"/>
+    <field var="context"/>
+    <field var="start_stamp"/>
+    <field var="answer_stamp"/>
+    <field var="end_stamp"/>
+    <field var="duration" quote="false"/>
+    <field var="billsec" quote="false"/>
+    <field var="hangup_cause"/>
+    <field var="uuid"/>
+    <field var="bleg_uuid"/>
+    <field var="accountcode"/>
+    <field var="read_codec"/>
+    <field var="write_codec"/>
+    <!-- <field var="sip_hangup_disposition"/> -->
+    <!-- <field var="ani"/> -->
+  </schema>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/cdr_sqlite.conf.xml b/data/freeswitch/conf/autoload_configs/cdr_sqlite.conf.xml
new file mode 100644
index 000000000..872c04c4f
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cdr_sqlite.conf.xml
@@ -0,0 +1,18 @@
+<configuration name="cdr_sqlite.conf" description="SQLite CDR">
+  <settings>
+    <!-- SQLite database name (.db suffix will be automatically appended) -->
+    <!-- <param name="db-name" value="cdr"/> -->
+    <!-- CDR table name -->
+    <!-- <param name="db-table" value="cdr"/> -->
+    <!-- Log a-leg (a), b-leg (b) or both (ab) -->
+    <param name="legs" value="a"/>
+    <!-- Default template to use when inserting records -->
+    <param name="default-template" value="example"/>
+    <!-- This is like the info app but after the call is hung up -->
+    <!--<param name="debug" value="true"/>-->
+  </settings>
+  <templates>
+    <!-- Note that field order must match SQL table schema, otherwise insert will fail -->
+    <template name="example">"${caller_id_name}","${caller_id_number}","${destination_number}","${context}","${start_stamp}","${answer_stamp}","${end_stamp}",${duration},${billsec},"${hangup_cause}","${uuid}","${bleg_uuid}","${accountcode}"</template>
+  </templates>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/cepstral.conf.xml b/data/freeswitch/conf/autoload_configs/cepstral.conf.xml
new file mode 100644
index 000000000..cf4aa92f4
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cepstral.conf.xml
@@ -0,0 +1,12 @@
+<configuration name="cepstral.conf" description="Cepstral TTS configuration">
+  <settings>
+    <!--
+        Possible encodings:
+        * utf-8
+        * us-ascii
+        * iso8859-1 (default)
+        * iso8859-15
+    -->
+    <param name="encoding" value="utf-8"/>
+  </settings>
+</configuration>
\ No newline at end of file
diff --git a/data/freeswitch/conf/autoload_configs/cidlookup.conf.xml b/data/freeswitch/conf/autoload_configs/cidlookup.conf.xml
new file mode 100644
index 000000000..a30f9f5c1
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/cidlookup.conf.xml
@@ -0,0 +1,33 @@
+<configuration name="cidlookup.conf" description="cidlookup Configuration">
+  <settings>
+    <!-- comment out url to not setup a url based lookup -->
+    <param name="url" value="http://query.voipcnam.com/query.php?api_key=MYAPIKEY&number=${caller_id_number}"/>
+
+    <!-- comment out whitepages-apikey to not use whitepages.com, you must
+         get an API key from http://developer.whitepages.com/ -->
+    <param name="whitepages-apikey" value="MYAPIKEY"/>
+
+    <!-- set to false to not cache (in memcache) results from the url query -->
+    <param name="cache" value="true"/>
+    <!-- expire is in seconds -->
+    <param name="cache-expire" value="86400"/>
+
+    <param name="odbc-dsn" value="phone:phone:phone"/>
+
+    <!-- comment out sql to not setup a database (directory) lookup -->
+    <param name="sql" value="
+     SELECT name||' ('||type||')' AS name 
+      FROM phonebook p JOIN numbers n ON p.id = n.phonebook_id
+      WHERE n.number='${caller_id_number}' 
+      LIMIT 1
+      "/>
+    <!-- comment out citystate-sql to not setup a database (city/state) 
+         lookup -->
+    <param name="citystate-sql" value="
+     SELECT ratecenter||' '||state as name
+      FROM npa_nxx_company_ocn
+      WHERE npa = ${caller_id_number:1:3} AND nxx = ${caller_id_number:4:3}
+      LIMIT 1
+      "/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/conference.conf.xml b/data/freeswitch/conf/autoload_configs/conference.conf.xml
new file mode 100644
index 000000000..826f6fb9b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/conference.conf.xml
@@ -0,0 +1,213 @@
+<!-- http://wiki.freeswitch.org/wiki/Mod_conference --> 
+<!-- None of these paths are real if you want any of these options you need to really set them up -->
+<configuration name="conference.conf" description="Audio Conference">
+  <!-- Advertise certain presence on startup . -->
+  <advertise>
+    <room name="3001@$${domain}" status="FreeSWITCH"/>
+  </advertise>
+
+  <!-- These are the default keys that map when you do not specify a caller control group -->	
+  <!-- Note: none and default are reserved names for group names.  Disabled if dist-dtmf member flag is set. -->	
+  <caller-controls>
+    <group name="default">
+      <control action="mute" digits="0"/>
+      <control action="deaf mute" digits="*"/>
+      <control action="energy up" digits="9"/>
+      <control action="energy equ" digits="8"/>
+      <control action="energy dn" digits="7"/>
+      <control action="vol talk up" digits="3"/>
+      <control action="vol talk zero" digits="2"/>
+      <control action="vol talk dn" digits="1"/>
+      <control action="vol listen up" digits="6"/>
+      <control action="vol listen zero" digits="5"/>
+      <control action="vol listen dn" digits="4"/>
+      <control action="hangup" digits="#"/>
+    </group>
+  </caller-controls>
+
+  <!-- Profiles are collections of settings you can reference by name. -->
+  <profiles>
+    <!--If no profile is specified it will default to "default"-->
+    <profile name="default">
+      <!-- Directory to drop CDR's 
+	   'auto' means $PREFIX/logs/conference_cdr/<confernece_uuid>.cdr.xml
+	   a non-absolute path means $PREFIX/logs/<value>/<confernece_uuid>.cdr.xml
+	   absolute path means <value>/<confernece_uuid>.cdr.xml
+      -->
+      <!-- <param name="cdr-log-dir" value="auto"/> -->
+      
+      <!-- Domain (for presence) -->
+      <param name="domain" value="$${domain}"/>
+      <!-- Sample Rate-->
+      <param name="rate" value="8000"/>
+      <!-- Number of milliseconds per frame -->
+      <param name="interval" value="20"/>
+      <!-- Energy level required for audio to be sent to the other users -->
+      <param name="energy-level" value="300"/>
+
+      <!--Can be | delim of waste|mute|deaf|dist-dtmf waste will always transmit data to each channel
+          even during silence.  dist-dtmf propagates dtmfs to all other members, but channel controls
+	  via dtmf will be disabled. -->
+      <!--<param name="member-flags" value="waste"/>-->
+
+      <!-- Name of the caller control group to use for this profile -->
+      <!-- <param name="caller-controls" value="some name"/> -->
+      <!-- Name of the caller control group to use for the moderator in this profile -->
+      <!-- <param name="moderator-controls" value="some name"/> -->
+      <!-- TTS Engine to use -->
+      <!--<param name="tts-engine" value="cepstral"/>-->
+      <!-- TTS Voice to use -->
+      <!--<param name="tts-voice" value="david"/>-->
+
+      <!-- If TTS is enabled all audio-file params beginning with -->
+      <!-- 'say:' will be considered text to say with TTS -->
+      <!-- Override the default path here, after which you use relative paths in the other sound params -->
+      <!-- Note: The default path is the conference's first caller's sound_prefix -->
+      <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
+      <!-- File to play to acknowledge succees -->
+      <!--<param name="ack-sound" value="beep.wav"/>-->
+      <!-- File to play to acknowledge failure -->
+      <!--<param name="nack-sound" value="beeperr.wav"/>-->
+      <!-- File to play to acknowledge muted -->
+      <param name="muted-sound" value="conference/conf-muted.wav"/>
+      <!-- File to play to acknowledge unmuted -->
+      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
+      <!-- File to play if you are alone in the conference -->
+      <param name="alone-sound" value="conference/conf-alone.wav"/>
+      <!-- File to play endlessly (nobody will ever be able to talk) -->
+      <!--<param name="perpetual-sound" value="perpetual.wav"/>-->
+      <!-- File to play when you're alone (music on hold)-->
+      <param name="moh-sound" value="$${hold_music}"/>
+      <!-- File to play when you join the conference -->
+      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>
+      <!-- File to play when you leave the conference -->
+      <param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>
+      <!-- File to play when you ae ejected from the conference -->
+      <param name="kicked-sound" value="conference/conf-kicked.wav"/>
+      <!-- File to play when the conference is locked -->
+      <param name="locked-sound" value="conference/conf-locked.wav"/>
+      <!-- File to play when the conference is locked during the call-->
+      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
+      <!-- File to play when the conference is unlocked during the call-->
+      <param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>
+      <!-- File to play to prompt for a pin -->
+      <param name="pin-sound" value="conference/conf-pin.wav"/>
+      <!-- File to play to when the pin is invalid -->
+      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
+      <!-- Conference pin -->
+      <!--<param name="pin" value="12345"/>-->
+      <!--<param name="moderator-pin" value="54321"/>-->
+      <!-- Max number of times the user can be prompted for PIN -->
+      <!--<param name="pin-retries" value="3"/>-->
+      <!-- Default Caller ID Name for outbound calls -->
+      <param name="caller-id-name" value="$${outbound_caller_name}"/>
+      <!-- Default Caller ID Number for outbound calls -->
+      <param name="caller-id-number" value="$${outbound_caller_id}"/>
+      <!-- Suppress start and stop talking events -->
+      <!-- <param name="suppress-events" value="start-talking,stop-talking"/> -->
+      <!-- enable comfort noise generation -->
+      <param name="comfort-noise" value="true"/>
+      <!-- Uncomment auto-record to toggle recording every conference call. -->
+      <!-- Another valid value is   shout://user:pass@server.com/live.mp3   -->
+      <!--
+      <param name="auto-record" value="$${recordings_dir}/${conference_name}_${strftime(%Y-%m-%d-%H-%M-%S)}.wav"/>
+      -->
+
+      <!-- IVR digit machine timeouts -->
+      <!-- How much to wait between DTMF digits to match caller-controls -->
+      <!-- <param name="ivr-dtmf-timeout" value="500"/> -->
+      <!-- How much to wait for the first DTMF, 0 forever -->
+      <!-- <param name="ivr-input-timeout" value="0" /> -->
+      <!-- Delay before a conference is asked to be terminated -->
+      <!-- <param name="endconf-grace-time" value="120" /> -->
+      <!-- Can be | delim of wait-mod|audio-always|video-bridge|video-floor-only
+           wait_mod will wait until the moderator in,
+           audio-always will always mix audio from all members regardless they are talking or not -->
+      <!-- <param name="conference-flags" value="audio-always"/> -->
+    </profile>
+
+    <profile name="wideband">
+      <param name="domain" value="$${domain}"/>
+      <param name="rate" value="16000"/>
+      <param name="interval" value="20"/>
+      <param name="energy-level" value="300"/>
+      <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
+      <param name="muted-sound" value="conference/conf-muted.wav"/>
+      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
+      <param name="alone-sound" value="conference/conf-alone.wav"/>
+      <param name="moh-sound" value="$${hold_music}"/>
+      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>
+      <param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>
+      <param name="kicked-sound" value="conference/conf-kicked.wav"/>
+      <param name="locked-sound" value="conference/conf-locked.wav"/>
+      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
+      <param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>
+      <param name="pin-sound" value="conference/conf-pin.wav"/>
+      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
+      <param name="caller-id-name" value="$${outbound_caller_name}"/>
+      <param name="caller-id-number" value="$${outbound_caller_id}"/>
+      <param name="comfort-noise" value="true"/>
+      <!--<param name="tts-engine" value="flite"/>-->
+      <!--<param name="tts-voice" value="kal16"/>-->
+    </profile>
+
+    <profile name="ultrawideband">
+      <param name="domain" value="$${domain}"/>
+      <param name="rate" value="32000"/>
+      <param name="interval" value="20"/>
+      <param name="energy-level" value="300"/>
+      <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
+      <param name="muted-sound" value="conference/conf-muted.wav"/>
+      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
+      <param name="alone-sound" value="conference/conf-alone.wav"/>
+      <param name="moh-sound" value="$${hold_music}"/>
+      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>
+      <param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>
+      <param name="kicked-sound" value="conference/conf-kicked.wav"/>
+      <param name="locked-sound" value="conference/conf-locked.wav"/>
+      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
+      <param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>
+      <param name="pin-sound" value="conference/conf-pin.wav"/>
+      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
+      <param name="caller-id-name" value="$${outbound_caller_name}"/>
+      <param name="caller-id-number" value="$${outbound_caller_id}"/>
+      <param name="comfort-noise" value="true"/>
+      <!--<param name="tts-engine" value="flite"/>-->
+      <!--<param name="tts-voice" value="kal16"/>-->
+    </profile>
+
+    <profile name="cdquality">
+      <param name="domain" value="$${domain}"/>
+      <param name="rate" value="48000"/>
+      <param name="interval" value="10"/>
+      <param name="energy-level" value="300"/>
+      <!--<param name="sound-prefix" value="$${sounds_dir}/en/us/callie"/>-->
+      <param name="muted-sound" value="conference/conf-muted.wav"/>
+      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
+      <param name="alone-sound" value="conference/conf-alone.wav"/>
+      <param name="moh-sound" value="$${hold_music}"/>
+      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>
+      <param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>
+      <param name="kicked-sound" value="conference/conf-kicked.wav"/>
+      <param name="locked-sound" value="conference/conf-locked.wav"/>
+      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
+      <param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>
+      <param name="pin-sound" value="conference/conf-pin.wav"/>
+      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
+      <param name="caller-id-name" value="$${outbound_caller_name}"/>
+      <param name="caller-id-number" value="$${outbound_caller_id}"/>
+      <param name="comfort-noise" value="true"/>
+    </profile>
+
+    <profile name="sla">
+      <param name="domain" value="$${domain}"/>
+      <param name="rate" value="16000"/>
+      <param name="interval" value="20"/>
+      <param name="caller-controls" value="none"/>
+      <param name="energy-level" value="200"/>
+      <param name="moh-sound" value="silence"/>
+      <param name="comfort-noise" value="true"/>
+    </profile>
+
+  </profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/console.conf.xml b/data/freeswitch/conf/autoload_configs/console.conf.xml
new file mode 100644
index 000000000..2d9e3e8de
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/console.conf.xml
@@ -0,0 +1,56 @@
+<configuration name="console.conf" description="Console Logger">
+  <!-- pick a file name, a function name or 'all' -->
+  <!-- map as many as you need for specific debugging -->
+  <mappings>
+    <!-- 
+      name can be a file name, function name or 'all' 
+      value is one or more of debug,info,notice,warning,err,crit,alert,all
+      See examples below
+
+
+      The following map is the default, which is all debug levels enabled:
+      <map name="all" value="debug,info,notice,warning,err,crit,alert"/>
+
+
+      Example: the following turns on debugging for error and critical levels only
+      <map name="all" value="err,crit"/>
+
+      NOTE: using map name="all" will override any other settings!  If you 
+            want a more specific set of console messages then you will need
+            to specify which files and/or functions you want to have debug
+            messages.  One option is to turn on just the more critical 
+            messages with map name="all", then specify the other types of 
+            console messages you want to see for various files and functions.
+
+      Example: turn on ERROR, CRIT, ALERT for all modules, then specify other
+               levels for various modules and functions
+
+        <map name="all" value="err,crit,alert"/>
+        <map name="switch_loadable_module_process" value="all"/>
+        <map name="mod_local_stream.c" value="warning,debug"/>
+        <map name="mod_sndfile.c" value="warning,info,debug"/>
+     -->
+    <map name="all" value="console,debug,info,notice,warning,err,crit,alert"/>
+    
+    <!--
+      You can use or modify this sample set of mappings.  It turns on higher
+      level messages for all modules and then specifies extra lower level
+      messages for OpenZAP, Sofia, and switch core messages.
+      
+    <map name="all"                         value="warning,err,crit,alert"/>
+    <map name="zap_analog.c"                value="all"/>
+    <map name="zap_io.c"                    value="all"/>
+    <map name="zap_isdn.c"                  value="all"/>
+    <map name="zap_zt.c"                    value="all"/>
+    <map name="mod_openzap"                 value="all"/>
+    <map name="sofia.c"                     value="notice"/>
+    <map name="switch_core_state_machine.c" value="all"/>      
+    
+    -->
+  </mappings>
+  <settings>
+    <!-- comment or set to false for no color logging -->
+    <param name="colorize" value="true"/>
+    <param name="loglevel" value="$${console_loglevel}"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/db.conf.xml b/data/freeswitch/conf/autoload_configs/db.conf.xml
new file mode 100644
index 000000000..abc6c0c15
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/db.conf.xml
@@ -0,0 +1,5 @@
+<configuration name="db.conf" description="LIMIT DB Configuration">
+  <settings>
+    <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/dialplan_directory.conf.xml b/data/freeswitch/conf/autoload_configs/dialplan_directory.conf.xml
new file mode 100644
index 000000000..e4edcd6b1
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/dialplan_directory.conf.xml
@@ -0,0 +1,9 @@
+<configuration name="dialplan_directory.conf" description="Dialplan Directory">
+  <settings>
+    <param name="directory-name" value="ldap"/>
+    <param name="host" value="ldap.freeswitch.org"/>
+    <param name="dn" value="cn=Manager,dc=freeswitch,dc=org"/>
+    <param name="pass" value="test"/>
+    <param name="base" value="dc=freeswitch,dc=org"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/dingaling.conf.xml b/data/freeswitch/conf/autoload_configs/dingaling.conf.xml
new file mode 100644
index 000000000..dd6c9a5da
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/dingaling.conf.xml
@@ -0,0 +1,9 @@
+<configuration name="dingaling.conf" description="XMPP Jingle Endpoint">
+  <settings>
+    <param name="debug" value="0"/>
+    <param name="codec-prefs" value="H264,PCMU"/>
+  </settings>
+
+  <X-PRE-PROCESS cmd="include" data="../jingle_profiles/*.xml"/>
+
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/directory.conf.xml b/data/freeswitch/conf/autoload_configs/directory.conf.xml
new file mode 100644
index 000000000..748b2337c
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/directory.conf.xml
@@ -0,0 +1,21 @@
+<configuration name="directory.conf" description="Directory">
+  <settings>
+      <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->
+      <!--<param name="dbname" value="directory"/>-->
+  </settings>
+  <profiles>
+    <profile name="default">
+      <param name="max-menu-attempts" value="3"/>
+      <param name="min-search-digits" value="3"/>
+      <param name="terminator-key" value="#"/>
+      <param name="digit-timeout" value="3000"/>
+      <param name="max-result" value="5"/>
+      <param name="next-key" value="6"/>
+      <param name="prev-key" value="4"/>
+      <param name="switch-order-key" value="*"/>
+      <param name="select-name-key" value="1"/>
+      <param name="new-search-key" value="3"/>
+      <param name="search-order" value="last_name"/>
+    </profile>
+  </profiles>
+</configuration> 
diff --git a/data/freeswitch/conf/autoload_configs/distributor.conf.xml b/data/freeswitch/conf/autoload_configs/distributor.conf.xml
new file mode 100644
index 000000000..a03b1ee81
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/distributor.conf.xml
@@ -0,0 +1,10 @@
+<configuration name="distributor.conf" description="Distributor Configuration">
+  <lists>
+    <!-- every 10 calls to test you will get foo1 once and foo2 9 times...yes NINE TIMES! -->
+    <!-- this is not the same as 100 with 10 and 90 that would do foo1 10 times in a row then foo2 90 times in a row -->
+    <list name="test" total-weight="10">
+      <node name="foo1" weight="1"/>
+      <node name="foo2" weight="9"/>
+    </list>
+  </lists>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/easyroute.conf.xml b/data/freeswitch/conf/autoload_configs/easyroute.conf.xml
new file mode 100644
index 000000000..350a50989
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/easyroute.conf.xml
@@ -0,0 +1,28 @@
+<configuration name="easyroute.conf" description="EasyRoute Module">
+  <settings>
+    <!-- These are kind Obvious -->
+    <param name="db-username" value="root"/>
+    <param name="db-password" value="password"/>
+    <param name="db-dsn" value="easyroute"/>
+
+    <!-- Default Technology and profile -->
+    <param name="default-techprofile" value="sofia/default"/>
+    
+    <!-- IP or Hostname of Default Route -->
+    <param name="default-gateway" value="192.168.66.6"/>
+
+    <!-- Number of times to retry ODBC connection on connection problems, default is 120 -->
+    <param name="odbc-retries" value="120"/>
+
+    <!-- Customer Query. Use this with Care!!! We are not responsible if you mess
+         This up!!! Query *MUST* return columns in the following order!
+	 gateway varchar(128) - contains destination gateway host:port pair (ex: 192.168.1.1:5060 )
+	 group varchar(128) - contains optional group name
+	 call_limit varchar(16) - contains optional call limit
+	 tech_prefix varchar(128) - tech prefix used to build dial string (ex: sofia/default )
+	 acctcode varchar(128) - used to set channel variable acctcode for logging into the CDRs
+	 destination_number varchar(16) - Number returning for the query for building the dial string. (ex: 18005551212) 
+	 See Documentation on the Wiki for further information -->
+    <!-- <param name="custom-query" value="call  FS_GET_SIP_LOCATION(%s);"/> -->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/enum.conf.xml b/data/freeswitch/conf/autoload_configs/enum.conf.xml
new file mode 100644
index 000000000..b9813efa2
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/enum.conf.xml
@@ -0,0 +1,21 @@
+<configuration name="enum.conf" description="ENUM Module">
+  <settings>
+    <param name="default-root" value="e164.org"/>
+    <param name="default-isn-root" value="freenum.org"/>
+    <param name="auto-reload" value="true"/>
+
+    <param name="query-timeout-ms" value="200"/>
+    <param name="query-timeout-retry" value="2"/>
+    <param name="random-nameserver" value="false"/>
+
+    <!-- If you have specific (non-recursive) servers for your enum queries, specify them here ( up to 10 ) -->
+    <!-- <param name="nameserver" value="x.x.x.x"/> -->
+    <!-- <param name="nameserver" value="y.y.y.y"/> -->
+  </settings>
+
+  <routes>
+    <route service="E2U+SIP" regex="sip:(.*)" replace="sofia/${use_profile}/$1;transport=udp"/>
+    <route service="E2T+SIP" regex="sip:(.*)" replace="sofia/${use_profile}/$1;transport=tcp"/>
+    <!--<route service="E2U+XMPP" regex="XMPP:(.*)" replace="dingaling/$${xmpp_server_profile}/$1"/>-->
+  </routes>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/erlang_event.conf.xml b/data/freeswitch/conf/autoload_configs/erlang_event.conf.xml
new file mode 100644
index 000000000..62deb84f6
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/erlang_event.conf.xml
@@ -0,0 +1,23 @@
+<configuration name="erlang_event.conf" description="Erlang Socket Client">
+  <settings>
+    <param name="listen-ip" value="0.0.0.0"/>
+    <param name="listen-port" value="8031"/>
+    <!-- Specify the first part of the node name
+         (the host part after the @ will be autodetected)
+         OR pass a complete nodename to avoid autodetection
+         eg. freeswitch@example or freeswitch@example.com.
+         If you pass a complete node name, the 'shortname' parameter has no effect. -->
+    <param name="nodename" value="freeswitch"/>
+    <!-- Specify this OR 'cookie-file' or $HOME/.erlang.cookie will be read -->
+    <param name="cookie" value="ClueCon"/>
+    <!-- Read a cookie from an arbitary erlang cookie file instead -->
+    <!--<param name="cookie-file" value="/tmp/erlang.cookie"/>-->
+    <param name="shortname" value="true"/>
+    <!-- in additon to cookie, optionally restrict by ACL -->
+    <!--<param name="apply-inbound-acl" value="lan"/>-->
+    <!-- alternative is "binary" -->
+    <!--<param name="encoding" value="string"/>--> 
+    <!-- provide compatability with previous OTP release (use with care) -->
+    <!--<param name="compat-rel" value="12"/> -->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/event_multicast.conf.xml b/data/freeswitch/conf/autoload_configs/event_multicast.conf.xml
new file mode 100644
index 000000000..eac039260
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/event_multicast.conf.xml
@@ -0,0 +1,14 @@
+<configuration name="event_multicast.conf" description="Multicast Event">
+  <settings>
+    <param name="address" value="225.1.1.1"/>
+    <param name="port" value="4242"/>
+    <param name="bindings" value="all"/>
+    <param name="ttl" value="1"/>
+    <!-- <param name="loopback" value="no"/>-->
+    <!-- Uncomment this to enable pre-shared key encryption on the packets. -->
+    <!-- For this option to work, you'll need to have the openssl development -->
+    <!-- headers installed when you ran ./configure -->
+    <!-- <param name="psk" value="ClueCon"/> -->
+  </settings>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/event_socket.conf.xml b/data/freeswitch/conf/autoload_configs/event_socket.conf.xml
new file mode 100644
index 000000000..5ea2e0978
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/event_socket.conf.xml
@@ -0,0 +1,9 @@
+<configuration name="event_socket.conf" description="Socket Client">
+  <settings>
+    <param name="nat-map" value="false"/>
+    <param name="listen-ip" value="127.0.0.1"/>
+    <param name="listen-port" value="8021"/>
+    <param name="password" value="ClueCon"/>
+    <!--<param name="apply-inbound-acl" value="lan"/>-->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/fax.conf.xml b/data/freeswitch/conf/autoload_configs/fax.conf.xml
new file mode 100644
index 000000000..c7d825665
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/fax.conf.xml
@@ -0,0 +1,12 @@
+<configuration name="fax.conf" description="FAX application configuration">
+    <settings>
+	<param name="use-ecm"		value="true"/>
+	<param name="verbose"		value="false"/>
+	<param name="disable-v17"	value="false"/>
+	<param name="ident"		value="SpanDSP Fax Ident"/>
+	<param name="header"		value="SpanDSP Fax Header"/>
+
+	<param name="spool-dir"		value="/tmp"/>
+	<param name="file-prefix"	value="faxrx"/>
+    </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/fifo.conf.xml b/data/freeswitch/conf/autoload_configs/fifo.conf.xml
new file mode 100644
index 000000000..b1db4dd2b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/fifo.conf.xml
@@ -0,0 +1,10 @@
+<configuration name="fifo.conf" description="FIFO Configuration">
+  <settings>
+    <param name="delete-all-outbound-member-on-startup" value="false"/>
+  </settings>
+  <fifos>
+    <fifo name="cool_fifo@$${domain}" importance="0">
+      <!--<member timeout="60" simo="1" lag="20">{member_wait=nowait}user/1005@$${domain}</member>-->
+    </fifo>
+  </fifos>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/hash.conf.xml b/data/freeswitch/conf/autoload_configs/hash.conf.xml
new file mode 100644
index 000000000..95b792877
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/hash.conf.xml
@@ -0,0 +1,6 @@
+<configuration name="hash.conf" description="Hash Configuration">
+  <remotes>
+	<!-- List of hosts from where to pull usage data -->
+	<!-- <remote name="Test1" host="10.0.0.10" port="8021" password="ClueCon" interval="1000" /> -->
+  </remotes>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/httapi.conf.xml b/data/freeswitch/conf/autoload_configs/httapi.conf.xml
new file mode 100644
index 000000000..50bbe78f4
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/httapi.conf.xml
@@ -0,0 +1,127 @@
+<configuration name="httapi.conf" description="HT-TAPI Hypertext Telephony API">
+  <settings>
+    <!-- print xml on the consol -->
+    <param name="debug" value="true"/>
+    <!-- time to keep audio files when discoverd they were deleted from the http server -->
+    <param name="file-not-found-expires" value="300"/>
+    <!-- how often to re-check the server to make sure the remote file has not changed -->
+    <param name="file-cache-ttl" value="300"/>
+  </settings>
+  <profiles>
+    <profile name="default">
+
+      <!-- default params for conference action tags -->
+      <conference>
+	<param name="default-profile" value="default"/>
+      </conference>
+
+      <!-- default params for dial action tags -->
+      <dial>
+	<param name="context" value="default"/>
+	<param name="dialplan" value="XML"/>
+      </dial>
+
+      <!-- permissions -->
+      <permissions>
+	<!-- <permission name="all" value="true"/> -->
+	<!--<permission name="none" value="true"/> -->
+	<permission name="set-params" value="true"/>
+	<permission name="set-vars" value="false">
+	  <!-- default to "deny" or "allow" -->
+	  <!-- type attr can be "deny" or "allow" nothing defaults to opposite of the list default so allow in this case -->
+	  <!-- 
+	  <variable-list default="deny">
+	    <variable name="caller_id_name"/>
+	    <variable name="hangup"/> 
+	  </variable-list>
+	  -->
+	</permission>
+	<permission name="get-vars" value="false">
+	  <!-- default to "deny" or "allow" -->
+	  <!-- type attr can be "deny" or "allow" nothing defaults to opposite of the list default so allow in this case -->
+	  <!-- 
+	  <variable-list default="deny">
+	    <variable name="caller_id_name"/>
+	    <variable name="hangup"/> 
+	  </variable-list>
+	  -->
+	</permission>
+	<permission name="extended-data" value="false"/>
+	<permission name="execute-apps" value="true">
+	  <!-- default to "deny" or "allow" -->
+	  <application-list default="deny">
+	    <!-- type attr can be "deny" or "allow" nothing defaults to opposite of the list default so allow in this case -->
+	    <application name="info"/>
+	    <application name="hangup"/>
+	  </application-list>
+	</permission>
+	<permission name="expand-vars-in-tag-body" value="false">
+	  <!-- default to "deny" or "allow" -->
+	  <!-- type attr can be "deny" or "allow" nothing defaults to opposite of the list default so allow in this case -->
+	  <!-- 
+	  <variable-list default="deny">
+	    <variable name="caller_id_name"/>
+	    <variable name="hangup"/> 
+	  </variable-list>
+
+	  <api-list default="deny">
+	    <api name="expr"/>
+	    <api name="lua"/> 
+	  </api-list>
+	  -->
+	</permission>
+	<permission name="dial" value="true"/>
+	<permission name="dial-set-context" value="false"/>
+	<permission name="dial-set-dialplan" value="false"/>
+	<permission name="dial-set-cid-name" value="false"/>
+	<permission name="dial-set-cid-number" value="false"/>
+	<permission name="dial-full-originate" value="false"/>
+	<permission name="conference" value="true"/>
+	<permission name="conference-set-profile" value="false"/>
+      </permissions>
+      
+      <params>
+	<!-- default url can be overridden by app data -->
+	<param name="gateway-url" value="http://www.freeswitch.org/api/index.cgi" />
+	
+	<!-- set this to provide authentication credentials to the server -->
+	<!--<param name="gateway-credentials" value="muser:mypass"/>-->
+	<!--<param name="auth-scheme" value="basic"/>-->
+
+	<!-- optional: this will enable the CA root certificate check by libcurl to
+	     verify that the certificate was issued by a major Certificate Authority.
+	     note: default value is disabled. only enable if you want this! -->
+	<!--<param name="enable-cacert-check" value="true"/>-->
+	<!-- optional: verify that the server is actually the one listed in the cert -->
+	<!-- <param name="enable-ssl-verifyhost" value="true"/> -->
+
+	<!-- optional: these options can be used to specify custom SSL certificates
+	     to use for HTTPS communications. Either use both options or neither.
+	     Specify your public key with 'ssl-cert-path' and the private key with
+	     'ssl-key-path'. If your private key has a password, specify it with
+	     'ssl-key-password'. -->
+	<!-- <param name="ssl-cert-path" value="$${base_dir}/conf/certs/public_key.pem"/> -->
+	<!-- <param name="ssl-key-path" value="$${base_dir}/conf/certs/private_key.pem"/> -->
+	<!-- <param name="ssl-key-password" value="MyPrivateKeyPassword"/> -->
+	<!-- optional timeout -->
+	<!-- <param name="timeout" value="10"/> -->
+
+	<!-- optional: use a custom CA certificate in PEM format to verify the peer
+	     with. This is useful if you are acting as your own certificate authority.
+	     note: only makes sense if used in combination with "enable-cacert-check." -->
+	<!-- <param name="ssl-cacert-file" value="$${base_dir}/conf/certs/cacert.pem"/> -->
+
+	<!-- optional: specify the SSL version to force HTTPS to use. Valid options are
+	     "SSLv3" and "TLSv1". Otherwise libcurl will auto-negotiate the version. -->
+	<!-- <param name="ssl-version" value="TLSv1"/> -->
+
+	<!-- optional: enables cookies and stores them in the specified file. -->
+	<!-- <param name="cookie-file" value="/tmp/cookie-mod_xml_curl.txt"/> -->
+
+	<!-- one or more of these imply you want to pick the exact variables that are transmitted -->
+	<!--<param name="enable-post-var" value="Caller-Unique-ID"/>-->
+      </params>
+
+    </profile>
+  </profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/http_cache.conf.xml b/data/freeswitch/conf/autoload_configs/http_cache.conf.xml
new file mode 100644
index 000000000..4f0526965
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/http_cache.conf.xml
@@ -0,0 +1,10 @@
+<configuration name="http_cache.conf" description="HTTP GET cache">
+  <settings>
+    <param name="max-urls" value="10000"/>
+    <param name="location" value="$${base_dir}/http_cache"/>
+    <param name="default-max-age" value="86400"/>
+    <param name="prefetch-thread-count" value="8"/>
+    <param name="prefetch-queue-size" value="100"/>
+  </settings>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/ivr.conf.xml b/data/freeswitch/conf/autoload_configs/ivr.conf.xml
new file mode 100644
index 000000000..bd4e73ded
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/ivr.conf.xml
@@ -0,0 +1,5 @@
+<configuration name="ivr.conf" description="IVR menus">
+  <menus>
+    <X-PRE-PROCESS cmd="include" data="../ivr_menus/*.xml"/>
+  </menus>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/java.conf.xml b/data/freeswitch/conf/autoload_configs/java.conf.xml
new file mode 100644
index 000000000..5f71553e3
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/java.conf.xml
@@ -0,0 +1,8 @@
+<configuration name="java.conf" description="Java Plug-Ins">
+  <javavm path="/opt/jdk1.6.0_04/jre/lib/amd64/server/libjvm.so"/>
+  <options>
+    <option value="-Djava.class.path=$${base_dir}/scripts/freeswitch.jar:$${base_dir}/scripts/example.jar"/>
+    <option value="-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=0.0.0.0:8000"/>
+  </options>
+  <startup class="org/freeswitch/example/ApplicationLauncher" method="startup"/>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/json_cdr.conf.xml b/data/freeswitch/conf/autoload_configs/json_cdr.conf.xml
new file mode 100644
index 000000000..32aebe155
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/json_cdr.conf.xml
@@ -0,0 +1,51 @@
+<configuration name="json_cdr.conf" description="JSON CDR">
+    <settings>
+
+      <!-- Global parameters -->
+      <param name="log-b-leg" value="false"/>
+      <param name="prefix-a-leg" value="false"/>
+
+      <!-- Whether to URL encode the individual JSON values. Defaults to true, set to false for standard JSON. -->
+      <param name="encode-values" value="false"/>
+
+      <!-- Normally if url and log-dir are present, url is attempted first and log-dir second. This options allows to do both systematically. -->
+      <param name="log-http-and-disk" value="false"/>
+
+      <!-- File logging -->
+      <!-- Directory where to create the "json_cdr" directory used to store JSON CDRs. Leave empty for no file logging. -->
+      <!-- Might be overriden by a channel variable "json_cdr_base". -->
+      <param name="log-dir" value=""/>
+      <!-- Whether to rotate file CDRs. -->
+      <param name="rotate" value="false"/>
+
+      <!-- HTTP(S) logging -->
+      <!-- URL where to POST JSON CDRs. Leave empty for no URL logging. Up to 20 URLs may be specified. -->
+      <param name="url" value="http://127.0.0.1:2022/freeswitch_json"/>
+      <!-- Authentication scheme for the above URL. May be one of basic|digest|NTLM|GSS-NEGOTIATE|any-->
+      <param name="auth-scheme" value="basic"/>
+      <!-- Credentials in the form  usernameassword  if auth-scheme is used. Leave empty for no authentication. -->
+      <param name="cred" value="string"/>
+      <!-- Whether to base64 encode the entire JSON document before POSTing it. -->
+      <param name="encode" value="base64|true|false"/>
+      <!-- Number of retries in case of failure. Each specified URL is tried in turn. -->
+      <param name="retries" value="0"/>
+      <!-- Delay between retries (ms). -->
+      <param name="delay" value="5000"/>
+      <!-- Disable streaming if the server doesn't support it. -->
+      <param name="disable-100-continue" value="false"/>
+      <!-- If web posting failed, the CDR is written to a file. -->
+      <!-- Error log dir ("json_cdr" is appended). Up to 20 may be specified. Default to log-dir if none is specified. -->
+      <param name="err-log-dir" value=""/>
+
+
+      <!-- SSL options -->
+      <param name="ssl-key-path" value=""/>
+      <param name="ssl-key-password" value=""/>
+      <!-- SSL version. If specified, must be either "SSLv3" or "TLSv1". -->
+      <param name="ssl-version" value=""/>
+      <param name="enable-ssl-verifyhost" value="false"/>
+      <param name="ssl-cert-path" value=""/>
+      <param name="enable-cacert-check" value="false"/>
+      <param name="ssl-cacert-file" value=""/>
+    </settings>
+  </configuration>
diff --git a/data/freeswitch/conf/autoload_configs/lcr.conf.xml b/data/freeswitch/conf/autoload_configs/lcr.conf.xml
new file mode 100644
index 000000000..9d106d489
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/lcr.conf.xml
@@ -0,0 +1,89 @@
+<configuration name="lcr.conf" description="LCR Configuration">
+  <settings>
+    <param name="odbc-dsn" value="freeswitch-mysql:freeswitch:Fr33Sw1tch"/>
+<!--    <param name="odbc-dsn" value="freeswitch-pgsql:freeswitch:Fr33Sw1tch"/> -->
+  </settings>
+  <profiles>
+    <profile name="default">
+      <param name="id" value="0"/>
+      <param name="order_by" value="rate,quality,reliability"/>
+    </profile>
+    <profile name="qual_rel">
+      <param name="id" value="1"/>
+      <param name="order_by" value="quality,reliability"/>
+    </profile>
+    <profile name="rel_qual">
+      <param name="id" value="2"/>
+      <param name="order_by" value="reliability,quality"/>
+    </profile>
+<!-- 
+  Some samples of how to do custom SQL:
+
+    =============================================================
+    PostgreSQL with contrib prefix module which supports fast
+    prefix queries.  Ideal option.
+    =============================================================
+    <profile name="pg_prefix">
+      <param name="custom_sql" value="
+SELECT l.digits AS lcr_digits,
+       c.carrier_name AS lcr_carrier_name,
+       l.${lcr_rate_field} as lcr_rate_field,
+       cg.prefix AS lcr_gw_prefix, cg.suffix AS lcr_gw_suffix,
+       l.lead_strip AS lcr_lead_strip, l.trail_strip AS lcr_trail_strip,
+       l.prefix AS lcr_prefix, l.suffix AS lcr_suffix
+  FROM lcr l
+    JOIN carriers c ON l.carrier_id=c.id
+    JOIN carrier_gateway cg ON c.id=cg.carrier_id
+  WHERE c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1'
+    AND digits_prefix @> %q
+    AND CURRENT_TIMESTAMP BETWEEN date_start AND date_end
+  ORDER BY digits DESC, ${lcr_rate_field}, random();
+      "/>
+    </profile>
+
+    =============================================================
+    PostgreSQL with contrib prefix module which supports fast
+    prefix queries.  Ideal option.  Alternate syntax which requies
+    a session but allows variable substitution.
+    =============================================================
+    <profile name="pg_prefix2">
+      <param name="custom_sql" value="
+SELECT l.digits AS lcr_digits,
+       c.carrier_name AS lcr_carrier_name,
+       l.${lcr_rate_field} as lcr_rate_field,
+       cg.prefix AS lcr_gw_prefix, cg.suffix AS lcr_gw_suffix,
+       l.lead_strip AS lcr_lead_strip, l.trail_strip AS lcr_trail_strip,
+       l.prefix AS lcr_prefix, l.suffix AS lcr_suffix
+  FROM lcr l
+    JOIN carriers c ON l.carrier_id=c.id
+    JOIN carrier_gateway cg ON c.id=cg.carrier_id
+  WHERE c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1'
+    AND digits_prefix @> '${lcr_query_digits}'
+    AND CURRENT_TIMESTAMP BETWEEN date_start AND date_end
+  ORDER BY digits DESC, ${lcr_rate_field}, random();
+      "/>
+    </profile>
+
+    =============================================================
+    Demonstrates use of computed inlist.
+    =============================================================
+    <profile name="inlist">
+      <param name="custom_sql" value="
+SELECT l.digits AS lcr_digits,
+       c.carrier_name AS lcr_carrier_name,
+       l.${lcr_rate_field} as lcr_rate_field,
+       cg.prefix AS lcr_gw_prefix, cg.suffix AS lcr_gw_suffix,
+       l.lead_strip AS lcr_lead_strip, l.trail_strip AS lcr_trail_strip,
+       l.prefix AS lcr_prefix, l.suffix AS lcr_suffix
+  FROM lcr l
+    JOIN carriers c ON l.carrier_id=c.id
+    JOIN carrier_gateway cg ON c.id=cg.carrier_id
+  WHERE c.enabled = '1' AND cg.enabled = '1' AND l.enabled = '1'
+    AND digits IN (${lcr_query_expanded_digits})
+    AND CURRENT_TIMESTAMP BETWEEN date_start AND date_end
+  ORDER BY digits DESC, ${lcr_rate_field}, random();
+      "/>
+    </profile>
+-->
+  </profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/local_stream.conf.xml b/data/freeswitch/conf/autoload_configs/local_stream.conf.xml
new file mode 100644
index 000000000..94a566539
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/local_stream.conf.xml
@@ -0,0 +1,49 @@
+<configuration name="local_stream.conf" description="stream files from local dir">
+  <!-- fallback to default if requested moh class isn't found -->
+  <directory name="default" path="$${sounds_dir}/music/8000">
+    <param name="rate" value="8000"/>
+    <param name="shuffle" value="true"/>
+    <param name="channels" value="1"/>
+    <param name="interval" value="20"/>
+    <param name="timer-name" value="soft"/>
+    <!-- list of short files to break in with every so often -->
+    <!--<param name="chime-list" value="file1.wav,file2.wav"/>-->
+    <!-- frequency of break-in (seconds)-->
+    <!--<param name="chime-freq" value="30"/>-->
+    <!-- limit to how many seconds the file will play -->
+    <!--<param name="chime-max" value="500"/>-->
+  </directory>
+
+  <directory name="moh/8000" path="$${sounds_dir}/music/8000">
+    <param name="rate" value="8000"/>
+    <param name="shuffle" value="true"/>
+    <param name="channels" value="1"/>
+    <param name="interval" value="20"/>
+    <param name="timer-name" value="soft"/>
+  </directory>
+
+  <directory name="moh/16000" path="$${sounds_dir}/music/16000">
+    <param name="rate" value="16000"/>
+    <param name="shuffle" value="true"/>
+    <param name="channels" value="1"/>
+    <param name="interval" value="20"/>
+    <param name="timer-name" value="soft"/>
+  </directory>
+
+  <directory name="moh/32000" path="$${sounds_dir}/music/32000">
+    <param name="rate" value="32000"/>
+    <param name="shuffle" value="true"/>
+    <param name="channels" value="1"/>
+    <param name="interval" value="20"/>
+    <param name="timer-name" value="soft"/>
+  </directory>
+  <!--
+  <directory name="moh/48000" path="$${sounds_dir}/music/48000">
+    <param name="rate" value="48000"/>
+    <param name="shuffle" value="true"/>
+    <param name="channels" value="1"/>
+    <param name="interval" value="10"/>
+    <param name="timer-name" value="soft"/>
+  </directory>
+  -->
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/logfile.conf.xml b/data/freeswitch/conf/autoload_configs/logfile.conf.xml
new file mode 100644
index 000000000..65bea552b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/logfile.conf.xml
@@ -0,0 +1,29 @@
+<configuration name="logfile.conf" description="File Logging">
+  <settings>
+   <!-- true to auto rotate on HUP, false to open/close -->
+   <param name="rotate-on-hup" value="true"/>
+  </settings>
+  <profiles>
+    <profile name="default">
+      <settings>
+        <!-- File to log to -->
+	<!--<param name="logfile" value="/var/log/freeswitch.log"/>-->
+        <!-- At this length in bytes rotate the log file (0 for never) -->
+        <param name="rollover" value="10485760"/>
+		<!-- Maximum number of log files to keep before wrapping -->
+		<!-- If this parameter is enabled, the log filenames will not include a date stamp -->
+		<!-- <param name="maximum-rotate" value="32"/> -->
+		<!-- Uncomment to prefix all log lines by the session's uuid  -->
+		<!-- <param name="uuid" value="true" /> -->
+      </settings>
+      <mappings>
+	<!-- 
+	     name can be a file name, function name or 'all' 
+	     value is one or more of debug,info,notice,warning,err,crit,alert,all
+	     Please see comments in console.conf.xml for more information
+	-->
+	<map name="all" value="debug,info,notice,warning,err,crit,alert"/>
+      </mappings>
+    </profile>
+  </profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/lua.conf.xml b/data/freeswitch/conf/autoload_configs/lua.conf.xml
new file mode 100644
index 000000000..1eb594f0b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/lua.conf.xml
@@ -0,0 +1,30 @@
+<configuration name="lua.conf" description="LUA Configuration">
+  <settings>
+
+    <!-- 
+    Specify local directories that will be searched for LUA modules
+    These entries will be pre-pended to the LUA_CPATH environment variable
+    -->
+    <!-- <param name="module-directory" value="/usr/lib/lua/5.1/?.so"/> -->
+    <!-- <param name="module-directory" value="/usr/local/lib/lua/5.1/?.so"/> -->
+
+    <!-- 
+    Specify local directories that will be searched for LUA scripts
+    These entries will be pre-pended to the LUA_PATH environment variable
+    -->
+    <!-- <param name="script-directory" value="/usr/local/lua/?.lua"/> -->
+    <!-- <param name="script-directory" value="$${base_dir}/scripts/?.lua"/> -->
+
+    <!--<param name="xml-handler-script" value="/dp.lua"/>-->
+    <!--<param name="xml-handler-bindings" value="dialplan"/>-->
+
+    <!--
+	The following options identifies a lua script that is launched
+	at startup and may live forever in the background.
+	You can define multiple lines, one for each script you 
+	need to run.
+    -->
+    <!--<param name="startup-script" value="startup_script_1.lua"/>-->
+    <!--<param name="startup-script" value="startup_script_2.lua"/>-->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/memcache.conf.xml b/data/freeswitch/conf/autoload_configs/memcache.conf.xml
new file mode 100644
index 000000000..dc0173f98
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/memcache.conf.xml
@@ -0,0 +1,6 @@
+<configuration name="memcache.conf" description="memcache Configuration">
+  <settings>
+    <!-- comma sep list of servers: eg:  localhost,otherhost:port,anotherone -->
+    <param name="memcache-servers" value="localhost"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/modules.conf.xml b/data/freeswitch/conf/autoload_configs/modules.conf.xml
new file mode 100644
index 000000000..68d89288c
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/modules.conf.xml
@@ -0,0 +1,134 @@
+<configuration name="modules.conf" description="Modules">
+  <modules>
+    
+    <!-- Loggers (I'd load these first) -->
+    <load module="mod_console"/>
+    <load module="mod_logfile"/>
+    <!-- <load module="mod_syslog"/> -->
+
+    <!--<load module="mod_yaml"/>-->
+
+    <!-- Multi-Faceted -->
+    <!-- mod_enum is a dialplan interface, an application interface and an api command interface -->
+    <load module="mod_enum"/>
+
+    <!-- XML Interfaces -->
+    <!-- <load module="mod_xml_rpc"/> -->
+    <!-- <load module="mod_xml_curl"/> -->
+    <!--<load module="mod_xml_cdr"/> -->
+    <!-- <load module="mod_xml_scgi"/> -->
+
+    <!-- Event Handlers -->
+    <load module="mod_cdr_csv"/>
+    <!-- <load module="mod_cdr_sqlite"/> -->
+    <!-- <load module="mod_event_multicast"/> -->
+    <load module="mod_event_socket"/>
+    <!-- <load module="mod_event_zmq"/> -->
+    <!-- <load module="mod_zeroconf"/> -->
+    <!-- <load module="mod_erlang_event"/> -->
+    <!-- <load module="mod_snmp"/> -->
+    <load module="mod_json_cdr"/>
+
+    <!-- Directory Interfaces -->
+    <!-- <load module="mod_ldap"/> -->
+
+    <!-- Endpoints -->
+    <!-- <load module="mod_dingaling"/> -->
+    <!-- <load module="mod_portaudio"/> -->
+    <!-- <load module="mod_alsa"/> -->
+    <load module="mod_sofia"/>
+    <load module="mod_loopback"/>
+    <!-- <load module="mod_woomera"/> -->
+    <!-- <load module="mod_freetdm"/> -->
+    <!-- <load module="mod_openzap"/> -->
+    <!-- <load module="mod_unicall"/> -->
+    <!-- <load module="mod_skinny"/> -->
+    <!-- <load module="mod_khomp"/>   -->
+    <!-- <load module="mod_rtmp"/>   -->
+
+    <!-- Applications -->
+    <load module="mod_commands"/>
+    <load module="mod_conference"/>
+    <!-- load module="mod_curl" -->
+    <load module="mod_db"/>
+    <load module="mod_dptools"/>
+    <load module="mod_expr"/>
+    <load module="mod_fifo"/>
+    <load module="mod_hash"/>
+    <load module="mod_voicemail"/>
+    <!--<load module="mod_directory"/>-->
+    <!--<load module="mod_distributor"/>-->
+    <!--<load module="mod_lcr"/>-->
+    <load module="mod_esf"/>
+    <load module="mod_fsv"/>
+    <load module="mod_cluechoo"/>
+    <load module="mod_valet_parking"/>
+    <!--<load module="mod_fsk"/>-->
+    <!--<load module="mod_spy"/>-->
+    <!--<load module="mod_random"/>-->
+    <load module="mod_httapi"/>
+
+    <!-- SNOM Module -->
+    <!--<load module="mod_snom"/>-->
+
+    <!-- This one only works on Linux for now -->
+    <!--<load module="mod_ladspa"/>-->
+
+    <!-- Dialplan Interfaces -->
+    <!-- <load module="mod_dialplan_directory"/> -->
+    <load module="mod_dialplan_xml"/>
+    <load module="mod_dialplan_asterisk"/>
+
+    <!-- Codec Interfaces -->
+    <load module="mod_spandsp"/>
+    <load module="mod_g723_1"/>
+    <load module="mod_g729"/>
+    <load module="mod_amr"/>
+    <!--<load module="mod_ilbc"/>-->
+    <load module="mod_speex"/>
+    <load module="mod_h26x"/>
+    <load module="mod_vp8"/>
+    <!--<load module="mod_siren"/>-->
+    <!--<load module="mod_isac"/>-->
+    <!--<load module="mod_celt"/>-->
+    <!--<load module="mod_opus"/>-->
+
+    <!-- File Format Interfaces -->
+    <load module="mod_sndfile"/>
+    <load module="mod_native_file"/>
+    <!-- <load module="mod_shell_stream"/> -->
+    <!--For icecast/mp3 streams/files-->
+    <!--<load module="mod_shout"/>-->
+    <!--For local streams (play all the files in a directory)-->
+    <load module="mod_local_stream"/>
+    <load module="mod_tone_stream"/>
+
+    <!-- Timers -->
+    <!-- <load module="mod_timerfd"/> -->
+    <!-- <load module="mod_posix_timer"/> -->
+
+    <!-- Languages -->
+    <load module="mod_spidermonkey"/>
+    <!-- <load module="mod_perl"/> -->
+    <!-- <load module="mod_python"/> -->
+    <!-- <load module="mod_java"/> -->
+    <load module="mod_lua"/>
+
+    <!-- ASR /TTS -->
+    <!-- <load module="mod_flite"/> -->
+    <!-- <load module="mod_pocketsphinx"/> -->
+    <!-- <load module="mod_cepstral"/> -->
+    <!-- <load module="mod_tts_commandline"/> -->
+    <!-- <load module="mod_rss"/> -->
+    
+    <!-- Say -->
+    <load module="mod_say_en"/>
+    <!-- <load module="mod_say_ru"/> -->
+    <!-- <load module="mod_say_zh"/> -->
+
+    <!-- Third party modules -->
+    <!--<load module="mod_nibblebill"/>-->
+    <!--<load module="mod_callcenter"/>-->
+
+  </modules>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/mongo.conf.xml b/data/freeswitch/conf/autoload_configs/mongo.conf.xml
new file mode 100644
index 000000000..8423645e9
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/mongo.conf.xml
@@ -0,0 +1,20 @@
+<configuration name="mongo.conf">
+  <settings>
+    <!-- 
+      connection-string handles different ways to connect to mongo
+      samples:
+         server:port
+         foo/server:port,server:port   SET
+    -->
+    <param name="connection-string" value="127.0.0.1:27017"/>
+    <param name="min-connections" value="10"/>
+    <param name="max-connections" value="100"/>
+
+<!--
+    <param name="map" value="function() { emit(this.a, 1); }"/>
+    <param name="reduce" value="function(key, values) { return Array.sum(values); }"/>
+    <param name="finalize" value="function(key, value) { return value;}"/>
+-->
+
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/nibblebill.conf.xml b/data/freeswitch/conf/autoload_configs/nibblebill.conf.xml
new file mode 100644
index 000000000..ed1c9332c
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/nibblebill.conf.xml
@@ -0,0 +1,50 @@
+<configuration name="nibblebill.conf" description="Nibble Billing">
+  <settings>
+    <!-- See http://wiki.freeswitch.org/wiki/Mod_nibblebill for help with these options -->
+
+    <!-- Information for connecting to your database -->
+    <param name="db_username" value="bandwidth.com"/>
+    <param name="db_password" value="password"/>
+    <param name="db_dsn" value="bandwidth.com"/>
+
+    <!-- The database table where your CASH column is located -->
+    <param name="db_table" value="accounts"/>
+
+    <!-- The column name where we store the value of the account -->
+    <param name="db_column_cash" value="cash"/>
+
+    <!-- The column name for the unique ID identifying the account -->
+    <param name="db_column_account" value="id"/>
+
+    <!-- Custom SQL for loading current balance - overrides column names
+         channel vars are interpreted.
+         field nibble_balance is used for balance info
+
+    <param name="custom_sql_lookup" value="SELECT cash AS nibble_balance FROM accounts WHERE account_code='${nibble_account}'"/>
+    -->
+
+    <!-- Custom SQL for loading current balance - overrides column names
+         channel vars are interpreted.
+         nibble_increment is the amount to update
+
+    <param name="custom_sql_save" value="UPDATE accounts SET cash=cash-${nibble_increment} WHERE account_code='${nibble_account}'"/>
+    -->
+
+
+    <!-- Default heartbeat interval. Set to 'off' for no heartbeat (i.e. bill only at end of call) -->
+    <param name="global_heartbeat" value="60"/>
+
+    <!-- By default, warn a caller when their balance is at $5.00. You can set this to a negative number. -->
+    <param name="lowbal_amt" value="5"/>
+    <param name="lowbal_action" value="play ding"/>
+
+    <!-- By default, terminate a caller when their balance hits $0.00. You can set this to a negative number. -->
+    <param name="nobal_amt" value="0"/>
+    <param name="nobal_action" value="hangup"/>
+
+    <!-- If a call goes beyond a certain dollar amount, flag or terminate it -->
+    <param name="percall_max_amt" value="100"/>
+    <param name="percall_action" value="hangup"/>
+
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/opal.conf.xml b/data/freeswitch/conf/autoload_configs/opal.conf.xml
new file mode 100644
index 000000000..280b69304
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/opal.conf.xml
@@ -0,0 +1,21 @@
+<configuration name="opal.conf" description="Opal Endpoints">
+   <settings>
+      <param name="trace-level" value="3"/>
+      <param name="context" value="default"/>
+      <param name="dialplan" value="XML"/>
+      <param name="dtmf-type" value="signal"/>                   <!-- string, signal, rfc2833, in-band -->
+      <param name="jitter-size" value="40,100"/>                 <!-- Jitter buffer min/max size, milliseconds -->
+      <!-- <param name="codec-prefs" value="PCMU,PCMA"/> -->     <!-- list, and preferecnce order, of codecs -->
+      <!-- <param name="disable-transcoding" value="true"/> -->  <!-- do not transcode, use source channel codec only -->
+      <param name="gk-address" value=""/>                        <!-- empty to disable, "*" to search LAN -->
+      <param name="gk-identifer" value=""/>                      <!-- optional name of gk -->
+      <param name="gk-interface" value="$${local_ip_v4}"/>       <!-- optional listener interface name -->
+   </settings>
+   <listeners>
+      <listener name="default">
+         <param name="h323-ip" value="$${local_ip_v4}"/>
+         <param name="h323-port" value="1720"/>
+      </listener>
+   </listeners>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/oreka.conf.xml b/data/freeswitch/conf/autoload_configs/oreka.conf.xml
new file mode 100644
index 000000000..29eabd5c2
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/oreka.conf.xml
@@ -0,0 +1,13 @@
+<!--
+To use this application simply install the open source Oreka recorder server (Orkaudio) and point
+the sip-server-addr and sip-server-port to the oreka server
+-->
+<configuration name="oreka.conf" description="Oreka Recorder configuration">
+  <settings>
+    <!--  Oreka/Orkaudio recording server address -->
+    <!-- <param name="sip-server-addr" value="192.168.1.200"/> -->
+
+    <!-- Which port to send signaling to in the recording server -->
+    <!-- <param name="sip-server-port" value="6000"/> -->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/osp.conf.xml b/data/freeswitch/conf/autoload_configs/osp.conf.xml
new file mode 100644
index 000000000..b320dbba8
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/osp.conf.xml
@@ -0,0 +1,53 @@
+<configuration name="osp.conf" description="OSP Module Configuration">
+	<settings>
+		<!-- Debug info flag -->
+		<param name="debug-info" value="disabled"/>
+		<!-- Log level for debug info -->
+		<param name="log-level" value="info"/>
+		<!-- Crypto hareware accelerate is disabled by default -->
+		<param name="crypto-hardware" value="disabled"/>
+		<!-- SIP settings -->
+		<param name="sip" module="sofia" profile="external"/>
+		<!-- H.323 settings -->
+		<!-- <param name="h323" module="h323" profile="external"/> -->
+		<!-- IAX settings -->
+		<!-- <param name="iax" module="iax" profile="external"/> -->
+		<!-- Skype settings -->
+		<!-- <param name="skype" module="skypopen" profile="external"/> -->
+		<!-- Default destination protocol -->
+		<param name="default-protocol" value="sip"/>
+	</settings>
+
+	<profiles>
+	<!-- Default OSP profile -->
+		<profile name="default">
+			<!-- Service point URLs, up to 8 allowed -->
+			<!-- <param name="service-point-url" value="http://osptestserver.transnexus.com:5045/osp"/> -->
+			<!-- <param name="service-point-url" value="https://127.0.0.1:1443/osp"/> -->
+			<param name="service-point-url" value="http://127.0.0.1:5045/osp"/>
+
+			<!-- FreeSWITCH IP address for OSP -->
+			<param name="device-ip" value="127.0.0.1:5080"/>
+
+			<!-- SSL lifetime in seconds -->
+			<param name="ssl-lifetime" value="300"/>
+			<!-- HTTP max connections, 1~1000 -->
+			<param name="http-max-connections" value="20"/>
+			<!-- HTTP persistence in seconds -->
+			<param name="http-persistence" value="60"/>
+			<!-- HTTP retry delay in seconds, 0~10 -->
+			<param name="http-retry-delay" value="0"/>
+			<!-- HTTP retry limit, 0~100 -->
+			<param name="http-retry-limit" value="2"/>
+			<!-- HTTP timeout in milliseconds, 200~60000 -->
+			<param name="http-timeout" value="10000"/>
+
+			<!-- OSP work mode, direct or indirect -->
+			<param name="work-mode" value="direct"/>
+			<!-- OSP service type, voice or npquery -->
+			<param name="service-type" value="voice"/>
+			<!-- Max number of destinations -->
+			<param name="max-destinations" value="12"/>
+		</profile>
+	</profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/perl.conf.xml b/data/freeswitch/conf/autoload_configs/perl.conf.xml
new file mode 100644
index 000000000..b2435000f
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/perl.conf.xml
@@ -0,0 +1,16 @@
+<configuration name="perl.conf" description="PERL Configuration">
+  <settings>
+    <!--<param name="xml-handler-script" value="/tmp/xml.pl"/>-->
+    <!--<param name="xml-handler-bindings" value="dialplan"/>-->
+
+    <!--
+	The following options identifies a perl script that is launched	
+	at startup and may live forever in the background.
+	You can define multiple lines, one for each script you 
+	need to run.
+    -->
+    <!--param name="startup-script" value="startup_script_1.pl"/-->
+    <!--param name="startup-script" value="startup_script_2.pl"/-->
+
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/pocketsphinx.conf.xml b/data/freeswitch/conf/autoload_configs/pocketsphinx.conf.xml
new file mode 100644
index 000000000..3bf7d5e57
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/pocketsphinx.conf.xml
@@ -0,0 +1,12 @@
+<configuration name="pocketsphinx.conf" description="PocketSphinx ASR Configuration">
+  <settings>
+    <param name="threshold" value="400"/>
+    <param name="silence-hits" value="25"/>
+    <param name="listen-hits" value="1"/>
+    <param name="auto-reload" value="true"/>
+    <!--<param name="language-weight" value="1"/>-->
+    <!--<param name="narrowband-model" value="communicator"/>-->
+    <!--<param name="wideband-model" value="wsj1"/>-->
+    <!--<param name="dictionary" value="default.dic"/>-->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/portaudio.conf.xml b/data/freeswitch/conf/autoload_configs/portaudio.conf.xml
new file mode 100644
index 000000000..02c21ef44
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/portaudio.conf.xml
@@ -0,0 +1,218 @@
+<configuration name="portaudio.conf" description="Soundcard Endpoint">
+  <settings>
+    <!-- indev, outdev, ringdev: 
+	 partial case sensitive string match on something in the name 
+	 or the device number prefixed with # eg "#1" (or blank for default) -->
+
+    <!-- device to use for input -->
+    <param name="indev" value=""/>
+    <!-- device to use for output -->
+    <param name="outdev" value=""/>
+
+    <!--device to use for inbound ring -->
+    <!--<param name="ringdev" value=""/>-->
+    <!--File to play as the ring sound -->
+    <!--<param name="ring-file" value="/sounds/ring.wav"/>-->
+    <!--Number of seconds to pause between rings -->
+    <!--<param name="ring-interval" value="5"/>-->
+    <!--Enable or Disable dual_streams-->
+    <!--<param name="dual-streams" value="true"/>-->
+
+    <!--file to play when calls are on hold-->
+    <param name="hold-file" value="$${hold_music}"/>
+    <!--Timer to use for hold music (i'd leave this one commented)-->
+    <!--<param name="timer-name" value="soft"/>-->
+
+    <!--Default dialplan and caller-id info -->
+    <param name="dialplan" value="XML"/>
+    <param name="cid-name" value="$${outbound_caller_name}"/>
+    <param name="cid-num" value="$${outbound_caller_id}"/>
+
+    <!--audio sample rate and interval -->
+    <param name="sample-rate" value="48000"/>
+    <param name="codec-ms" value="20"/>
+  </settings>
+
+  <!-- 
+	mod_portaudio "streams"
+
+	The portaudio streams were introduced to support multiple devices and multiple channels in mod_portaudio.
+	For example, if you have a sound card that supports multiple channels or have multiple sound cards and you
+	want to use them at the same time, you can do it configuring streams and endpoints here.
+
+	A "stream" is just a logical container for some settings required by portaudio in order to stream audio and
+	define a friendly name for that configuration. Streams in itself do not do anything else than contain configs. 
+	Once you have your streams defined you can proceed to define "endpoints". Go to the "<endpoints>" section 
+	for more information on endpoints.
+
+	You can use the command "pa shstreams" (portaudio shared streams) to show the configured streams.
+  -->
+  <streams>
+  	<!--
+	In this example we define 2 streams, one for a usb audio device and another for the usual Mac defaults
+	The name="" attribute in the <stream> tag must uniquely identify the stream configuration and can be
+	later used when creating endpoints in the "instream" and "outstream" parameters of the endpoint.
+	-->
+
+	<!-- This sample "usb1" configuration was tested with a USB Griffin iMic device -->
+  	<stream name="usb1">
+		<!-- 
+			Which device to use for input in this stream 
+			The value for this parameter must be either in the form '#devno', 
+			for example '#2' for device number 2, or 'device-name', like 'iMic USB audio system'
+			The output of command "pa devlist" will show you device names and numbers as enumerated
+			by portaudio.
+		-->
+		<param name="indev" value="#2" />
+
+		<!-- 
+			Same as the indev but for output. In this case the device is capable of input and output
+			Some devices are capable of input only or output only (see the default example)
+	       	-->
+		<param name="outdev" value="#2" />
+
+		<!-- The sample rate to use for this stream -->
+		<param name="sample-rate" value="48000" />
+
+		<!-- 
+			Size of the packets in milliseconds. The smaller the number the less latency you'll have
+			The minimum value is 10ms 
+		-->
+		<param name="codec-ms" value="10" />
+
+		<!-- 
+			How many channels to open for this stream.
+			If you're device is stereo, you can choose 2 here. However, bear in mind that then
+			your left and right channels will be separated and when creating endpoints you will have
+			to either choose the left or right channel. This may or may not be what you want. This separation
+			means that you can have 2 separate FreeSWITCH calls, listening to one of them in your left channel
+			and the other in the right chanel.
+		-->
+		<param name="channels" value="2" />
+  	</stream>
+
+	<!-- This default stream was tested using the default Macbook Pro input/output devices -->
+  	<stream name="default">
+		<!-- The default system input device -->
+		<param name="indev" value="#0" />
+		<!-- The default system output device -->
+		<param name="outdev" value="#1" />
+		<!-- CD quality sampling rate ftw -->
+		<param name="sample-rate" value="48000" />
+		<!-- Low latency -->
+		<param name="codec-ms" value="10" />
+		<!-- Choosing 1 channel allows to hear in both left-right channel when using a headset -->
+		<param name="channels" value="1" />
+  	</stream>
+  </streams>
+
+  <!-- 
+	mod_portaudio "endpoints"
+
+	Endpoints is a way to define the input and output that a given portaudio channel will use.
+	There is a lot of flexibility. You can create endpoints which are "send-only", which means
+	audio will be read from FreeSWITCH and sent down to the provided stream, but no audio will
+	be read from that stream and only silence provided back to FreeSWITCH.
+
+		send-only endpoint:
+			(FS CORE) ->-> audio ->-> sound-card-x
+
+	You can also create a read-only endpoint.
+
+		read-only-endpoint:
+			(FS CORE) <-<- audio <-<- sound-card-x
+
+	And of course you can create a bidirectional endpoint:
+		bidirectional-endpoint:
+			(FS CORE) <-> audio <-> sound-card-x
+
+	You can also define a stream which uses only the left or only the right channel of a given device stream.
+	This means you can have 2 SIP calls connected to the same device haring one call in your left ear and
+	the other call to your right ear :-)
+
+	The name="parameter" of the endpoint allows you to use it in the FreeSWITCH dial plan to dial, ie:
+
+	<action application="bridge" data="portaudio/endpoint/usb1out-left" />
+
+	You can use the command "pa endpoints" to show the configured endpoints.
+  -->
+  <endpoints>
+
+	<!-- 
+		An endpoint is a handle name to refer to a configuration that determines where to read media from 
+		and write media to. The endpoint can use any input/output stream combination for that purpose as 
+		long as the streams match the sampling rate and codec-ms (see <streams> XML tag).
+		You can also omit the instream or the outstream parameter (but obviously not both).
+	-->
+
+	<!-- 
+		Configuration for a "default" bidirectional endpoint that uses the default stream defined previously in
+		the <streams> section.
+	 -->
+  	<endpoint name="default">
+		<!-- 
+			The instream, outstream is the name of the stream and channel to use. The stream
+			name is the same you configured in the <streams> section. This parameters follow 
+			the syntax <stream-name>:<channel index>. You can omit either the outstream
+			or the instream, but not both! The channel index is zero-based and must be consistent 
+			with the number of channels available for that stream (as configured in the <stream> section).
+			You cannot use index 1 if you chose channels=1 in the stream configuration.
+		-->
+		<param name="instream" value="default:0" />
+		<param name="outstream" value="default:0" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'send-only' or 'output-only' and uses the channel index 0 (left channel in a stereo device) 
+	-->
+  	<endpoint name="usb1out-left">
+		<param name="outstream" value="usb1:0" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'send-only' or 'output-only' and uses the channel index 1 (right channel in a stereo device) 
+	-->
+  	<endpoint name="usb1out-right">
+		<param name="outstream" value="usb1:1" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'receive-only' or 'input-only' and uses the channel index 0 (left channel in a stereo device) 
+	-->
+  	<endpoint name="usb1in-left">
+		<param name="instream" value="usb1:0" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'receive-only' or 'input-only' and uses the channel index 1 (right channel in a stereo device) 
+	-->
+  	<endpoint name="usb1in-right">
+		<param name="instream" value="usb1:1" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'bidirectional' or 'send-receive' and uses the channel index 0 (left channel in a stereo device) 
+	-->
+  	<endpoint name="usb1-left">
+		<param name="instream" value="usb1:0" />
+		<param name="outstream" value="usb1:0" />
+	</endpoint>
+
+	<!-- 
+		This endpoint uses the USB stream defined previously in the <streams> section and
+		is 'bidirectional' or 'send-receive' and uses the channel index 1 (right channel in a stereo device) 
+	-->
+  	<endpoint name="usb1-right">
+		<param name="instream" value="usb1:1" />
+		<param name="outstream" value="usb1:1" />
+	</endpoint>
+
+  </endpoints>
+
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/post_load_modules.conf.xml b/data/freeswitch/conf/autoload_configs/post_load_modules.conf.xml
new file mode 100644
index 000000000..8f4e132fa
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/post_load_modules.conf.xml
@@ -0,0 +1,4 @@
+<configuration name="post_load_modules.conf" description="Modules">
+  <modules>
+  </modules>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/presence_map.conf.xml b/data/freeswitch/conf/autoload_configs/presence_map.conf.xml
new file mode 100644
index 000000000..8a9d1dde5
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/presence_map.conf.xml
@@ -0,0 +1,7 @@
+<configuration name="presence_map.conf" description="PRESENCE MAP">
+  <domains>
+    <domain name="$${domain}">
+      <exten regex="3\d+" proto="conf"/>
+    </domain>
+  </domains>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/python.conf.xml b/data/freeswitch/conf/autoload_configs/python.conf.xml
new file mode 100644
index 000000000..d3a8fdc75
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/python.conf.xml
@@ -0,0 +1,16 @@
+<configuration name="python.conf" description="PYTHON Configuration">
+  <settings>
+    <!--<param name="xml-handler-script" value="dp"/>-->
+    <!--<param name="xml-handler-bindings" value="dialplan"/>-->
+
+    <!--
+	The following options identifies a py module that is launched
+	at startup and may live forever in the background.
+	You can define multiple lines, one for each script you 
+	need to run.
+    -->
+    <!--<param name="startup-script" value="startup_script_1"/>-->
+    <!--<param name="startup-script" value="startup_script_2"/>-->
+
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/redis.conf.xml b/data/freeswitch/conf/autoload_configs/redis.conf.xml
new file mode 100644
index 000000000..1a1f47403
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/redis.conf.xml
@@ -0,0 +1,7 @@
+<configuration name="redis.conf" description="mod_redis Configuration">
+  <settings>
+    <param name="host" value="localhost"/>
+    <param name="port" value="6379"/>
+    <param name="timeout" value="10000"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/rss.conf.xml b/data/freeswitch/conf/autoload_configs/rss.conf.xml
new file mode 100644
index 000000000..f8c4f6d2b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/rss.conf.xml
@@ -0,0 +1,7 @@
+<configuration name="rss.conf" description="RSS Parser">
+  <feeds>
+    <!-- Just download the files to wherever and refer to them here -->
+    <!-- <feed name="Slash Dot">/home/rss/rss.rss</feed> -->
+    <!-- <feed name="News Forge">/home/rss/newsforge.rss</feed> -->
+  </feeds>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/rtmp.conf.xml b/data/freeswitch/conf/autoload_configs/rtmp.conf.xml
new file mode 100644
index 000000000..d5d278810
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/rtmp.conf.xml
@@ -0,0 +1,17 @@
+<configuration name="rtmp.conf" description="RTMP Endpoint">
+  <profiles>
+	<profile name="default">
+		<settings>
+			<param name="bind-address" value="0.0.0.0:1935" />
+			<param name="context" value="public" />
+			<param name="dialplan" value="XML" />
+			<!-- If this is set to true, no unauthenticated inbound calls will be allowed -->
+			<param name="auth-calls" value="true" />
+			<!-- How much time should the clients buffer the media stream (miliseconds) -->
+			<param name="buffer-len" value="50" />
+			<!-- Sets the maximum size of outbound RTMP chunks -->
+			<param name="chunksize" value="512" />
+		</settings>
+	</profile>
+  </profiles>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml b/data/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml
new file mode 100644
index 000000000..eed9d673e
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml
@@ -0,0 +1,37 @@
+<configuration name="sangoma_codec.conf" description="Sangoma Codec Configuration">
+
+	<settings>
+		<!--
+		Comma separated list of codecs to register with FreeSWITCH, 
+		by default (if this parameter is not set) all available codecs are registered.
+		Valid codec values are: PCMU,PCMA,G729,G726-32,G722,GSM,G723,AMR,G7221,iLBC
+		If this parameter is not specified only G729 will be registered
+		<param name="register" value="all"/>
+		-->
+
+		<!-- 
+		List of codecs to not register with FreeSWITCH, by default this is empty,
+	        but you may want to not load PCMU and PCMA or may be others to not use your 
+	        resources in codecs that are done well and fast in software.	
+		<param name="noregister" value="PCMU,PCMA"/>
+		-->
+
+		<!--
+		Transcoding SOAP server URL. If you are installing the soap server (sngtc_server)
+		in the same box where FreeSWITCH, do not use this value, the default URL
+		that is hard-coded will work out of the box for local installations.
+		If you modify this value, you must configure your SOAP server (/etc/sngtc/sngtc_server.conf.xml)
+		to listen for HTTP requests on the same IP/port that you specify here.
+		<param name="soapserver" value="http://192.168.1.100:8080"/>
+		-->
+
+		<!--
+		RTP IP to use
+		By default, this module asks FreeSWITCH for the local ip address. However if you want to use a specific
+		IP address you can set it here.
+		<param name="rtpip" value="192.168.1.1"/>
+		-->
+	</settings>
+
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/shout.conf.xml b/data/freeswitch/conf/autoload_configs/shout.conf.xml
new file mode 100644
index 000000000..3f381e627
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/shout.conf.xml
@@ -0,0 +1,8 @@
+<configuration name="shout.conf" description="mod shout config">
+  <settings>
+    <!-- Don't change these unless you are insane -->
+    <!--<param name="decoder" value="i586"/>-->
+    <!--<param name="volume" value=".1"/>-->
+    <!--<param name="outscale" value="8192"/>-->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/skinny.conf.xml b/data/freeswitch/conf/autoload_configs/skinny.conf.xml
new file mode 100644
index 000000000..6a878fcd7
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/skinny.conf.xml
@@ -0,0 +1,6 @@
+<configuration name="skinny.conf" description="Skinny Endpoints">
+  <profiles>
+    <X-PRE-PROCESS cmd="include" data="../skinny_profiles/*.xml"/>
+  </profiles>
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/sofia.conf.xml b/data/freeswitch/conf/autoload_configs/sofia.conf.xml
new file mode 100644
index 000000000..a5e861432
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/sofia.conf.xml
@@ -0,0 +1,19 @@
+<configuration name="sofia.conf" description="sofia Endpoint">
+
+  <global_settings>
+    <param name="log-level" value="0"/>
+    <!-- <param name="auto-restart" value="false"/> -->
+    <param name="debug-presence" value="0"/>
+    <!-- <param name="capture-server" value="udp:homer.domain.com:5060"/> -->
+  </global_settings>
+
+  <!--
+      The rabbit hole goes deep.  This includes all the
+      profiles in the sip_profiles directory that is up
+      one level from this directory.
+  -->
+  <profiles>
+    <X-PRE-PROCESS cmd="include" data="../sip_profiles/*.xml"/>
+  </profiles>
+
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/spandsp.conf.xml b/data/freeswitch/conf/autoload_configs/spandsp.conf.xml
new file mode 100644
index 000000000..f70416bc6
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/spandsp.conf.xml
@@ -0,0 +1,113 @@
+<configuration name="spandsp.conf" description="SpanDSP config">
+    <modem-settings>
+<!--
+    total-modems set to N will create that many soft-modems.  
+    If you use them with Hylafax you need the following for each one numbered 0..N:
+
+    1) A line like this in /etc/inittab:
+
+      f0:2345:respawn:/usr/lib/fax/faxgetty /dev/FS0
+
+    2) copy conf/config.FS0 to /var/spool/hylafax/etc (or wherver the appropriate dir is on your system)
+
+    Subsequent modem configs would incrment the 0 to 1 and so on.
+
+-->
+      <param name="total-modems" value="0"/>
+
+      <!-- Default context and dialplan to use on inbound calls from the modems -->
+      <param name="context" value="default"/>
+      <param name="dialplan" value="XML"/>
+
+      <!-- Extra tracing for debugging -->
+      <param name="verbose" value="false"/>
+    </modem-settings>
+
+    <fax-settings>
+	<param name="use-ecm"		value="true"/>
+	<param name="verbose"		value="false"/>
+	<param name="disable-v17"	value="false"/>
+	<param name="ident"		value="SpanDSP Fax Ident"/>
+	<param name="header"		value="SpanDSP Fax Header"/>
+
+	<param name="spool-dir"		value="/tmp"/>
+	<param name="file-prefix"	value="faxrx"/>
+    </fax-settings>
+
+    <descriptors>
+
+     <!-- These tones are defined in Annex to ITU Operational Bulletin No. 781 - 1.II.2003 -->
+     <!-- Various Tones Used in National Networks (According to ITU-T Recommendation E.180)(03/1998) -->
+
+     <!-- North America -->
+     <descriptor name="1">
+       <tone name="CED_TONE">
+         <element freq1="2100" freq2="0" min="700" max="0"/>
+       </tone>
+       <tone name="SIT">
+         <element freq1="950" freq2="0" min="256" max="400"/>
+         <element freq1="1400" freq2="0" min="256" max="400"/>
+         <element freq1="1800" freq2="0" min="256" max="400"/>
+       </tone>
+       <tone name="RING_TONE" description="North America ring">
+         <element freq1="440" freq2="480" min="1200" max="0"/>
+       </tone>
+       <tone name="REORDER_TONE">
+         <element freq1="480" freq2="620" min="224" max="316"/>
+         <element freq1="0" freq2="0" min="168" max="352"/>
+         <element freq1="480" freq2="620" min="224" max="316"/>
+       </tone>
+       <tone name="BUSY_TONE">
+         <element freq1="480" freq2="620" min="464" max="536"/>
+         <element freq1="0" freq2="0" min="464" max="572"/>
+         <element freq1="480" freq2="620" min="464" max="536"/>
+       </tone>
+     </descriptor>
+
+     <!-- United Kingdom -->
+     <descriptor name="44">
+       <tone name="CED_TONE">
+         <element freq1="2100" freq2="0" min="500" max="0"/>
+       </tone>
+       <tone name="SIT">
+         <element freq1="950" freq2="0" min="256" max="400"/>
+         <element freq1="1400" freq2="0" min="256" max="400"/>
+         <element freq1="1800" freq2="0" min="256" max="400"/>
+       </tone>
+       <tone name="REORDER_TONE">
+         <element freq1="400" freq2="0" min="368" max="416"/>
+         <element freq1="0" freq2="0" min="336" max="368"/>
+         <element freq1="400" freq2="0" min="256" max="288"/>
+         <element freq1="0" freq2="0" min="512" max="544"/>
+       </tone>
+       <tone name="BUSY_TONE">
+         <element freq1="400" freq2="0" min="352" max="384"/>
+         <element freq1="0" freq2="0" min="352" max="384"/>
+         <element freq1="400" freq2="0" min="352" max="384"/>
+         <element freq1="0" freq2="0" min="352" max="384"/>
+       </tone>
+     </descriptor>
+
+     <!-- Germany -->
+     <descriptor name="49">
+       <tone name="CED_TONE">
+         <element freq1="2100" freq2="0" min="500" max="0"/>
+       </tone>
+       <tone name="SIT">
+         <element freq1="900" freq2="0" min="256" max="400"/>
+         <element freq1="1400" freq2="0" min="256" max="400"/>
+         <element freq1="1800" freq2="0" min="256" max="400"/>
+       </tone>
+       <tone name="REORDER_TONE">
+         <element freq1="425" freq2="0" min="224" max="272"/>
+         <element freq1="0" freq2="0" min="224" max="272"/>
+       </tone>
+       <tone name="BUSY_TONE">
+         <element freq1="425" freq2="0" min="464" max="516"/>
+         <element freq1="0" freq2="0" min="464" max="516"/>
+       </tone>
+     </descriptor>
+   </descriptors>
+
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/spidermonkey.conf.xml b/data/freeswitch/conf/autoload_configs/spidermonkey.conf.xml
new file mode 100644
index 000000000..2e6dc6a16
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/spidermonkey.conf.xml
@@ -0,0 +1,8 @@
+<configuration name="spidermonkey.conf" description="Spider Monkey JavaScript Plug-Ins">
+  <modules>
+    <load module="mod_spidermonkey_teletone"/>
+    <load module="mod_spidermonkey_core_db"/>
+    <load module="mod_spidermonkey_socket"/>
+    <!--<load module="mod_spidermonkey_odbc"/>-->
+  </modules>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/switch.conf.xml b/data/freeswitch/conf/autoload_configs/switch.conf.xml
new file mode 100644
index 000000000..ddf41f899
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/switch.conf.xml
@@ -0,0 +1,168 @@
+<configuration name="switch.conf" description="Core Configuration">
+
+  <cli-keybindings>
+    <key name="1" value="help"/>
+    <key name="2" value="status"/>
+    <key name="3" value="show channels"/>
+    <key name="4" value="show calls"/>
+    <key name="5" value="sofia status"/>
+    <key name="6" value="reloadxml"/>
+    <key name="7" value="console loglevel 0"/>
+    <key name="8" value="console loglevel 7"/>
+    <key name="9" value="sofia status profile internal"/>
+    <key name="10" value="sofia profile internal siptrace on"/>
+    <key name="11" value="sofia profile internal siptrace off"/>
+    <key name="12" value="version"/>
+  </cli-keybindings> 
+  
+  <default-ptimes>
+    <!-- Set this to override the 20ms assumption of various codecs in the sdp with no ptime defined -->
+    <!-- <codec name="G729" ptime="40"/> -->
+  </default-ptimes>
+  
+  <settings>
+    <!-- Colorize the Console -->
+    <param name="colorize-console" value="true"/>
+
+    <!-- Run the timer at 20ms by default and drop down as needed unless you set 1m-timer=true which was previous default -->
+    <!-- <param name="1ms-timer" value="true"/> -->
+
+    <!--
+	Set the Switch Name for HA environments.
+	When setting the switch name, it will override the system hostname for all DB and CURL requests
+	allowing cluster environments such as RHCS to have identical FreeSWITCH configurations but run
+	as different hostnames.
+    -->
+    <!-- <param name="switchname" value="freeswitch"/> -->
+
+    <!-- Maximum number of simultaneous DB handles open -->
+    <param name="max-db-handles" value="50"/>
+    <!-- Maximum number of seconds to wait for a new DB handle before failing -->
+    <param name="db-handle-timeout" value="10"/>
+
+    <!-- Minimum idle CPU before refusing calls -->
+    <!-- <param name="min-idle-cpu" value="25"/> -->
+
+    <!--
+	Max number of sessions to allow at any given time.
+	
+	NOTICE: If you're driving 28 T1's in a single box you should set this to 644*2 or 1288
+	this will ensure you're able to use the entire DS3 without a problem.  Otherwise you'll
+	be 144 channels short of always filling that DS3 up which can translate into waste.
+    -->
+    <param name="max-sessions" value="1000"/>
+    <!--Most channels to create per second -->
+    <param name="sessions-per-second" value="30"/>
+    <!-- Default Global Log Level - value is one of debug,info,notice,warning,err,crit,alert -->
+    <param name="loglevel" value="debug"/>
+
+    <!-- Set the core DEBUG level (0-10) -->
+    <!-- <param name="debug-level" value="10"/> -->
+
+    <!-- SQL Buffer length within rage of 32k to 10m -->
+    <!-- <param name="sql-buffer-len" value="1m"/> -->
+    <!-- Maximum SQL Buffer length must be greater than sql-buffer-len -->
+    <!-- <param name="max-sql-buffer-len" value="2m"/> -->
+
+    <!-- 
+	 The min-dtmf-duration specifies the minimum DTMF duration to use on 
+	 outgoing events. Events shorter than this will be increased in duration
+	 to match min_dtmf_duration. You cannot configure a dtmf duration on a 
+	 profile that is less than this setting. You may increase this value,
+	 but cannot set it lower than 400. This value cannot exceed 
+	 max-dtmf-duration. -->
+    <!-- <param name="min-dtmf-duration" value="400"/> -->
+
+    <!-- 
+	 The max-dtmf-duration caps the playout of a DTMF event at the specified
+	 duration. Events exceeding this duration will be truncated to this
+	 duration. You cannot configure a duration on a profile that exceeds
+	 this setting. This setting can be lowered, but cannot exceed 192000. 
+	 This setting cannot be set lower than min_dtmf_duration. -->
+    <!-- <param name="max-dtmf-duration" value="192000"/> -->
+
+    <!-- 
+	 The default_dtmf_duration specifies the DTMF duration to use on
+	 originated DTMF events or on events that are received without a
+	 duration specified. This value can be increased or lowered. This
+	 value is lower-bounded by min_dtmf_duration and upper-bounded by
+	 max-dtmf-duration\. -->
+    <!-- <param name="default-dtmf-duration" value="2000"/> -->
+
+    <!--
+	If you want to send out voicemail notifications via Windows you'll need to change the mailer-app
+	variable to the setting below:
+	
+	<param name="mailer-app" value="msmtp"/>
+	
+	Do not change mailer-app-args.
+	You will also need to download a sendmail clone for Windows (msmtp). This version works without issue:
+	http://msmtp.sourceforge.net/index.html. Download and copy the .exe to %winddir%\system32.
+	You'll need to create a small config file for smtp credentials (host name, authentication, tls, etc.) in
+	%USERPROFILE%\Application Data\ called "msmtprc.txt". Below is a sample copy of this file:
+	
+	###################################
+	# The SMTP server of the provider.
+	account provider
+	host smtp.myisp.com
+	from john@myisp.com
+	auth login
+	user johndoe
+	password mypassword
+	
+	# Set a default account
+	account default : provider
+	###################################
+	
+    -->    
+
+    <param name="mailer-app" value="sendmail"/>
+    <param name="mailer-app-args" value="-t"/>
+    <param name="dump-cores" value="yes"/>
+
+    <!-- Enable verbose channel events to include every detail about a channel on every event  -->
+    <!-- <param name="verbose-channel-events" value="no"/> -->
+
+    <!-- Enable clock nanosleep -->
+    <!-- <param name="enable-clock-nanosleep" value="true"/> -->
+
+    <!-- Enable monotonic timing -->
+    <!-- <param name="enable-monotonic-timing" value="true"/> -->
+
+    <!-- NEEDS DOCUMENTATION -->
+    <!-- <param name="enable-softtimer-timerfd" value="true"/> -->
+    <!-- <param name="enable-cond-yield" value="true"/> -->
+    <!-- <param name="enable-timer-matrix" value="true"/> -->
+    <!-- <param name="threaded-system-exec" value="true"/> -->
+    <!-- <param name="tipping-point" value="0"/> -->
+    <!-- <param name="timer-affinity" value="disabled"/> -->
+    <!-- NEEDS DOCUMENTATION -->
+
+    <!-- RTP port range -->
+    <!-- <param name="rtp-start-port" value="16384"/> -->
+    <!-- <param name="rtp-end-port" value="32768"/> -->
+
+    <param name="rtp-enable-zrtp" value="true"/>
+
+    <!-- <param name="core-db-dsn" value="pgsql://hostaddr=127.0.0.1 dbname=freeswitch user=freeswitch password='' options='-c client_min_messages=NOTICE' application_name='freeswitch'" /> -->
+    <!-- <param name="core-db-dsn" value="dsn:username:password" /> -->
+    <!-- 
+	 Allow to specify the sqlite db at a different location (In this example, move it to ramdrive for
+	 better performance on most linux distro (note, you loose the data if you reboot))
+    -->
+    <!-- <param name="core-db-name" value="/dev/shm/core.db" /> -->
+
+    <!-- The system will create all the db schemas automatically, set this to false to avoid this behaviour -->
+    <!-- <param name="auto-create-schemas" value="true"/> -->
+    <!-- <param name="auto-clear-sql" value="true"/> -->
+    <!-- <param name="enable-early-hangup" value="true"/> -->
+
+    <!-- <param name="core-dbtype" value="MSSQL"/> -->
+
+    <!-- Allow multiple registrations to the same account in the central registration table -->
+    <!-- <param name="multiple-registrations" value="true"/> -->
+
+  </settings>
+
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/syslog.conf.xml b/data/freeswitch/conf/autoload_configs/syslog.conf.xml
new file mode 100644
index 000000000..636a12c8c
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/syslog.conf.xml
@@ -0,0 +1,18 @@
+<configuration name="syslog.conf" description="Syslog Logger">
+  <!-- SYSLOG -->
+  <!-- emerg   - system is unusable  -->
+  <!-- alert   - action must be taken immediately  -->
+  <!-- crit    - critical conditions  -->
+  <!-- err     - error conditions  -->
+  <!-- warning - warning conditions  -->
+  <!-- notice  - normal, but significant, condition  -->
+  <!-- info    - informational message  -->
+  <!-- debug   - debug-level message -->
+  <settings>
+    <param name="facility" value="user"/>
+    <param name="ident" value="freeswitch"/>
+    <param name="loglevel" value="warning"/>
+	<!-- Uncomment the following line to log uuids in syslogs (when applicable) -->
+    <!-- <param name="uuid" value="true"/> -->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/timezones.conf.xml b/data/freeswitch/conf/autoload_configs/timezones.conf.xml
new file mode 100644
index 000000000..397e9a979
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/timezones.conf.xml
@@ -0,0 +1,551 @@
+<configuration name="timezones.conf" description="Timezones">
+    <timezones>
+	<zone name="Africa/Abidjan" value="GMT0" />
+	<zone name="Africa/Accra" value="GMT0" />
+	<zone name="Africa/Addis_Ababa" value="EAT-3" />
+	<zone name="Africa/Algiers" value="CET-1" />
+	<zone name="Africa/Asmara" value="EAT-3" />
+	<zone name="Africa/Asmera" value="EAT-3" />
+	<zone name="Africa/Bamako" value="GMT0" />
+	<zone name="Africa/Bangui" value="WAT-1" />
+	<zone name="Africa/Banjul" value="GMT0" />
+	<zone name="Africa/Bissau" value="GMT0" />
+	<zone name="Africa/Blantyre" value="CAT-2" />
+	<zone name="Africa/Brazzaville" value="WAT-1" />
+	<zone name="Africa/Bujumbura" value="CAT-2" />
+	<zone name="Africa/Cairo" value="EET-2EEST,M4.5.5/1,M9.5.5/3" />
+	<zone name="Africa/Casablanca" value="WET0" />
+	<zone name="Africa/Ceuta" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Africa/Conakry" value="GMT0" />
+	<zone name="Africa/Dakar" value="GMT0" />
+	<zone name="Africa/Dar_es_Salaam" value="EAT-3" />
+	<zone name="Africa/Djibouti" value="EAT-3" />
+	<zone name="Africa/Douala" value="WAT-1" />
+	<zone name="Africa/El_Aaiun" value="WET0" />
+	<zone name="Africa/Freetown" value="GMT0" />
+	<zone name="Africa/Gaborone" value="CAT-2" />
+	<zone name="Africa/Harare" value="CAT-2" />
+	<zone name="Africa/Johannesburg" value="SAST-2" />
+	<zone name="Africa/Kampala" value="EAT-3" />
+	<zone name="Africa/Khartoum" value="EAT-3" />
+	<zone name="Africa/Kigali" value="CAT-2" />
+	<zone name="Africa/Kinshasa" value="WAT-1" />
+	<zone name="Africa/Lagos" value="WAT-1" />
+	<zone name="Africa/Libreville" value="WAT-1" />
+	<zone name="Africa/Lome" value="GMT0" />
+	<zone name="Africa/Luanda" value="WAT-1" />
+	<zone name="Africa/Lubumbashi" value="CAT-2" />
+	<zone name="Africa/Lusaka" value="CAT-2" />
+	<zone name="Africa/Malabo" value="WAT-1" />
+	<zone name="Africa/Maputo" value="CAT-2" />
+	<zone name="Africa/Maseru" value="SAST-2" />
+	<zone name="Africa/Mbabane" value="SAST-2" />
+	<zone name="Africa/Mogadishu" value="EAT-3" />
+	<zone name="Africa/Monrovia" value="GMT0" />
+	<zone name="Africa/Nairobi" value="EAT-3" />
+	<zone name="Africa/Ndjamena" value="WAT-1" />
+	<zone name="Africa/Niamey" value="WAT-1" />
+	<zone name="Africa/Nouakchott" value="GMT0" />
+	<zone name="Africa/Ouagadougou" value="GMT0" />
+	<zone name="Africa/Porto-Novo" value="WAT-1" />
+	<zone name="Africa/Sao_Tome" value="GMT0" />
+	<zone name="Africa/Timbuktu" value="GMT0" />
+	<zone name="Africa/Tripoli" value="EET-2" />
+	<zone name="Africa/Tunis" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Africa/Windhoek" value="WAT-1WAST,M9.1.0,M4.1.0" />
+
+	<zone name="America/Adak" value="HAST10HADT,M3.2.0,M11.1.0" />
+	<zone name="America/Anchorage" value="AKST9AKDT,M3.2.0,M11.1.0" />
+	<zone name="America/Anguilla" value="AST4" />
+	<zone name="America/Antigua" value="AST4" />
+	<zone name="America/Araguaina" value="BRT3" />
+	<zone name="America/Argentina/Buenos_Aires" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Catamarca" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/ComodRivadavia" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Cordoba" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Jujuy" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/La_Rioja" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Mendoza" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Rio_Gallegos" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/San_Juan" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/San_Luis" value="ART3" />
+	<zone name="America/Argentina/Tucuman" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Argentina/Ushuaia" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Aruba" value="AST4" />
+	<zone name="America/Asuncion" value="PYT4PYST,M10.3.0/0,M3.2.0/0" />
+	<zone name="America/Atikokan" value="EST5" />
+	<zone name="America/Atka" value="HAST10HADT,M3.2.0,M11.1.0" />
+	<zone name="America/Bahia" value="BRT3" />
+	<zone name="America/Barbados" value="AST4" />
+	<zone name="America/Belem" value="BRT3" />
+	<zone name="America/Belize" value="CST6" />
+	<zone name="America/Blanc-Sablon" value="AST4" />
+	<zone name="America/Boa_Vista" value="AMT4" />
+	<zone name="America/Bogota" value="COT5" />
+	<zone name="America/Boise" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/Buenos_Aires" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Cambridge_Bay" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/Campo_Grande" value="AMT4AMST,M10.2.0/0,M2.3.0/0" />
+	<zone name="America/Cancun" value="CST6CDT,M4.1.0,M10.5.0" />
+	<zone name="America/Caracas" value="VET4:30" />
+	<zone name="America/Catamarca" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Cayenne" value="GFT3" />
+	<zone name="America/Cayman" value="EST5" />
+	<zone name="America/Chicago" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Chihuahua" value="MST7MDT,M4.1.0,M10.5.0" />
+	<zone name="America/Coral_Harbour" value="EST5" />
+	<zone name="America/Cordoba" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Costa_Rica" value="CST6" />
+	<zone name="America/Cuiaba" value="AMT4AMST,M10.2.0/0,M2.3.0/0" />
+	<zone name="America/Curacao" value="AST4" />
+	<zone name="America/Danmarkshavn" value="GMT0" />
+	<zone name="America/Dawson" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="America/Dawson_Creek" value="MST7" />
+	<zone name="America/Denver" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/Detroit" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Dominica" value="AST4" />
+	<zone name="America/Edmonton" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/Eirunepe" value="ACT5" />
+	<zone name="America/El_Salvador" value="CST6" />
+	<zone name="America/Ensenada" value="PST8PDT,M4.1.0,M10.5.0" />
+	<zone name="America/Fortaleza" value="BRT3" />
+	<zone name="America/Fort_Wayne" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Glace_Bay" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="America/Godthab" value="WGST" />
+	<zone name="America/Goose_Bay" value="AST4ADT,M3.2.0/0:01,M11.1.0/0:01" />
+	<zone name="America/Grand_Turk" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Grenada" value="AST4" />
+	<zone name="America/Guadeloupe" value="AST4" />
+	<zone name="America/Guatemala" value="CST6" />
+	<zone name="America/Guayaquil" value="ECT5" />
+	<zone name="America/Guyana" value="GYT4" />
+	<zone name="America/Halifax" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="America/Havana" value="CST5CDT,M3.3.0/0,M10.5.0/1" />
+	<zone name="America/Hermosillo" value="MST7" />
+	<zone name="America/Indiana/Indianapolis" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Knox" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Marengo" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Petersburg" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indianapolis" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Tell_City" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Vevay" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Vincennes" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Indiana/Winamac" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Inuvik" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/Iqaluit" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Jamaica" value="EST5" />
+	<zone name="America/Jujuy" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Juneau" value="AKST9AKDT,M3.2.0,M11.1.0" />
+	<zone name="America/Kentucky/Louisville" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Kentucky/Monticello" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Knox_IN" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/La_Paz" value="BOT4" />
+	<zone name="America/Lima" value="PET5" />
+	<zone name="America/Los_Angeles" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="America/Louisville" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Maceio" value="BRT3" />
+	<zone name="America/Managua" value="CST6" />
+	<zone name="America/Manaus" value="AMT4" />
+	<zone name="America/Marigot" value="AST4" />
+	<zone name="America/Martinique" value="AST4" />
+	<zone name="America/Mazatlan" value="MST7MDT,M4.1.0,M10.5.0" />
+	<zone name="America/Mendoza" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Menominee" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Merida" value="CST6CDT,M4.1.0,M10.5.0" />
+	<zone name="America/Mexico_City" value="CST6CDT,M4.1.0,M10.5.0" />
+	<zone name="America/Miquelon" value="PMST3PMDT,M3.2.0,M11.1.0" />
+	<zone name="America/Moncton" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="America/Monterrey" value="CST6CDT,M4.1.0,M10.5.0" />
+	<zone name="America/Montevideo" value="UYT3UYST,M10.1.0,M3.2.0" />
+	<zone name="America/Montreal" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Montserrat" value="AST4" />
+	<zone name="America/Nassau" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/New_York" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Nipigon" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Nome" value="AKST9AKDT,M3.2.0,M11.1.0" />
+	<zone name="America/Noronha" value="FNT2" />
+	<zone name="America/North_Dakota/Center" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/North_Dakota/New_Salem" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Panama" value="EST5" />
+	<zone name="America/Pangnirtung" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Paramaribo" value="SRT3" />
+	<zone name="America/Phoenix" value="MST7" />
+	<zone name="America/Port-au-Prince" value="EST5" />
+	<zone name="America/Porto_Acre" value="ACT5" />
+	<zone name="America/Port_of_Spain" value="AST4" />
+	<zone name="America/Porto_Velho" value="AMT4" />
+	<zone name="America/Puerto_Rico" value="AST4" />
+	<zone name="America/Rainy_River" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Rankin_Inlet" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Recife" value="BRT3" />
+	<zone name="America/Regina" value="CST6" />
+	<zone name="America/Resolute" value="EST5" />
+	<zone name="America/Rio_Branco" value="ACT5" />
+	<zone name="America/Rosario" value="ART3ARST,M10.1.0/0,M3.3.0/0" />
+	<zone name="America/Santiago" value="CLST" />
+	<zone name="America/Santo_Domingo" value="AST4" />
+	<zone name="America/Sao_Paulo" value="BRT3BRST,M10.2.0/0,M2.3.0/0" />
+	<zone name="America/Scoresbysund" value="EGT1EGST,M3.5.0/0,M10.5.0/1" />
+	<zone name="America/Shiprock" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="America/St_Barthelemy" value="AST4" />
+	<zone name="America/St_Johns" value="NST3:30NDT,M3.2.0/0:01,M11.1.0/0:01" />
+	<zone name="America/St_Kitts" value="AST4" />
+	<zone name="America/St_Lucia" value="AST4" />
+	<zone name="America/St_Thomas" value="AST4" />
+	<zone name="America/St_Vincent" value="AST4" />
+	<zone name="America/Swift_Current" value="CST6" />
+	<zone name="America/Tegucigalpa" value="CST6" />
+	<zone name="America/Thule" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="America/Thunder_Bay" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Tijuana" value="PST8PDT,M4.1.0,M10.5.0" />
+	<zone name="America/Toronto" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="America/Tortola" value="AST4" />
+	<zone name="America/Vancouver" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="America/Virgin" value="AST4" />
+	<zone name="America/Whitehorse" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="America/Winnipeg" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="America/Yakutat" value="AKST9AKDT,M3.2.0,M11.1.0" />
+	<zone name="America/Yellowknife" value="MST7MDT,M3.2.0,M11.1.0" />
+
+	<zone name="Antarctica/Casey" value="WST-8" />
+	<zone name="Antarctica/Davis" value="DAVT-7" />
+	<zone name="Antarctica/DumontDUrville" value="DDUT-10" />
+	<zone name="Antarctica/Mawson" value="MAWT-6" />
+	<zone name="Antarctica/McMurdo" value="NZST-12NZDT,M9.5.0,M4.1.0/3" />
+	<zone name="Antarctica/Palmer" value="CLST" />
+	<zone name="Antarctica/Rothera" value="ROTT3" />
+	<zone name="Antarctica/South_Pole" value="NZST-12NZDT,M9.5.0,M4.1.0/3" />
+	<zone name="Antarctica/Syowa" value="SYOT-3" />
+	<zone name="Antarctica/Vostok" value="VOST-6" />
+
+	<zone name="Arctic/Longyearbyen" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+
+	<zone name="Asia/Aden" value="AST-3" />
+	<zone name="Asia/Almaty" value="ALMT-6" />
+	<zone name="Asia/Amman" value="EET-2EEST,M3.5.4/0,M10.5.5/1" />
+	<zone name="Asia/Anadyr" value="ANAT-12ANAST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Aqtau" value="AQTT-5" />
+	<zone name="Asia/Aqtobe" value="AQTT-5" />
+	<zone name="Asia/Ashgabat" value="TMT-5" />
+	<zone name="Asia/Ashkhabad" value="TMT-5" />
+	<zone name="Asia/Baghdad" value="AST-3" />
+	<zone name="Asia/Bahrain" value="AST-3" />
+	<zone name="Asia/Baku" value="AZT-4AZST,M3.5.0/4,M10.5.0/5" />
+	<zone name="Asia/Bangkok" value="ICT-7" />
+	<zone name="Asia/Beirut" value="EET-2EEST,M3.5.0/0,M10.5.0/0" />
+	<zone name="Asia/Bishkek" value="KGT-6" />
+	<zone name="Asia/Brunei" value="BNT-8" />
+	<zone name="Asia/Calcutta" value="IST-5:30" />
+	<zone name="Asia/Choibalsan" value="CHOT-9" />
+	<zone name="Asia/Chongqing" value="CST-8" />
+	<zone name="Asia/Chungking" value="CST-8" />
+	<zone name="Asia/Colombo" value="IST-5:30" />
+	<zone name="Asia/Dacca" value="BDT-6" />
+	<zone name="Asia/Damascus" value="EET-2EEST,M4.1.5/0,J274/0" />
+	<zone name="Asia/Dhaka" value="BDT-6" />
+	<zone name="Asia/Dili" value="TLT-9" />
+	<zone name="Asia/Dubai" value="GST-4" />
+	<zone name="Asia/Dushanbe" value="TJT-5" />
+	<zone name="Asia/Gaza" value="EET-2EEST,J91/0,M9.2.4" />
+	<zone name="Asia/Harbin" value="CST-8" />
+	<zone name="Asia/Ho_Chi_Minh" value="ICT-7" />
+	<zone name="Asia/Hong_Kong" value="HKT-8" />
+	<zone name="Asia/Hovd" value="HOVT-7" />
+	<zone name="Asia/Irkutsk" value="IRKT-8IRKST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Istanbul" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Asia/Jakarta" value="WIT-7" />
+	<zone name="Asia/Jayapura" value="EIT-9" />
+	<zone name="Asia/Jerusalem" value="IDDT" />
+	<zone name="Asia/Kabul" value="AFT-4:30" />
+	<zone name="Asia/Kamchatka" value="PETT-12PETST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Karachi" value="PKT-5" />
+	<zone name="Asia/Kashgar" value="CST-8" />
+	<zone name="Asia/Katmandu" value="NPT-5:45" />
+	<zone name="Asia/Kolkata" value="IST-5:30" />
+	<zone name="Asia/Krasnoyarsk" value="KRAT-7KRAST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Kuala_Lumpur" value="MYT-8" />
+	<zone name="Asia/Kuching" value="MYT-8" />
+	<zone name="Asia/Kuwait" value="AST-3" />
+	<zone name="Asia/Macao" value="CST-8" />
+	<zone name="Asia/Macau" value="CST-8" />
+	<zone name="Asia/Magadan" value="MAGT-11MAGST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Makassar" value="CIT-8" />
+	<zone name="Asia/Manila" value="PHT-8" />
+	<zone name="Asia/Muscat" value="GST-4" />
+	<zone name="Asia/Nicosia" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Asia/Novosibirsk" value="NOVT-6NOVST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Omsk" value="OMST-6OMSST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Oral" value="ORAT-5" />
+	<zone name="Asia/Phnom_Penh" value="ICT-7" />
+	<zone name="Asia/Pontianak" value="WIT-7" />
+	<zone name="Asia/Pyongyang" value="KST-9" />
+	<zone name="Asia/Qatar" value="AST-3" />
+	<zone name="Asia/Qyzylorda" value="QYZT-6" />
+	<zone name="Asia/Rangoon" value="MMT-6:30" />
+	<zone name="Asia/Riyadh" value="AST-3" />
+	<zone name="Asia/Riyadh87" value="zzz-3:07:04" />
+	<zone name="Asia/Riyadh88" value="zzz-3:07:04" />
+	<zone name="Asia/Riyadh89" value="zzz-3:07:04" />
+	<zone name="Asia/Saigon" value="ICT-7" />
+	<zone name="Asia/Sakhalin" value="SAKT-10SAKST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Samarkand" value="UZT-5" />
+	<zone name="Asia/Seoul" value="KST-9" />
+	<zone name="Asia/Shanghai" value="CST-8" />
+	<zone name="Asia/Singapore" value="SGT-8" />
+	<zone name="Asia/Taipei" value="CST-8" />
+	<zone name="Asia/Tashkent" value="UZT-5" />
+	<zone name="Asia/Tbilisi" value="GET-4" />
+	<zone name="Asia/Tehran" value="IRDT" />
+	<zone name="Asia/Tel_Aviv" value="IDDT" />
+	<zone name="Asia/Thimbu" value="BTT-6" />
+	<zone name="Asia/Thimphu" value="BTT-6" />
+	<zone name="Asia/Tokyo" value="JST-9" />
+	<zone name="Asia/Ujung_Pandang" value="CIT-8" />
+	<zone name="Asia/Ulaanbaatar" value="ULAT-8" />
+	<zone name="Asia/Ulan_Bator" value="ULAT-8" />
+	<zone name="Asia/Urumqi" value="CST-8" />
+	<zone name="Asia/Vientiane" value="ICT-7" />
+	<zone name="Asia/Vladivostok" value="VLAT-10VLAST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Yakutsk" value="YAKT-9YAKST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Yekaterinburg" value="YEKT-5YEKST,M3.5.0,M10.5.0/3" />
+	<zone name="Asia/Yerevan" value="AMT-4AMST,M3.5.0,M10.5.0/3" />
+
+	<zone name="Atlantic/Azores" value="AZOT1AZOST,M3.5.0/0,M10.5.0/1" />
+	<zone name="Atlantic/Bermuda" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="Atlantic/Canary" value="WET0WEST,M3.5.0/1,M10.5.0" />
+	<zone name="Atlantic/Cape_Verde" value="CVT1" />
+	<zone name="Atlantic/Faeroe" value="WET0WEST,M3.5.0/1,M10.5.0" />
+	<zone name="Atlantic/Faroe" value="WET0WEST,M3.5.0/1,M10.5.0" />
+	<zone name="Atlantic/Jan_Mayen" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Atlantic/Madeira" value="WET0WEST,M3.5.0/1,M10.5.0" />
+	<zone name="Atlantic/Reykjavik" value="GMT0" />
+	<zone name="Atlantic/South_Georgia" value="GST2" />
+	<zone name="Atlantic/Stanley" value="FKT4FKST,M9.1.0,M4.3.0" />
+	<zone name="Atlantic/St_Helena" value="GMT0" />
+
+	<zone name="Australia/ACT" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Adelaide" value="CST-9:30CST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Brisbane" value="EST-10" />
+	<zone name="Australia/Broken_Hill" value="CST-9:30CST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Canberra" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Currie" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Darwin" value="CST-9:30" />
+	<zone name="Australia/Eucla" value="CWST-8:45" />
+	<zone name="Australia/Hobart" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/LHI" value="LHST-10:30LHST-11,M10.1.0,M4.1.0" />
+	<zone name="Australia/Lindeman" value="EST-10" />
+	<zone name="Australia/Lord_Howe" value="LHST-10:30LHST-11,M10.1.0,M4.1.0" />
+	<zone name="Australia/Melbourne" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/North" value="CST-9:30" />
+	<zone name="Australia/NSW" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Perth" value="WST-8" />
+	<zone name="Australia/Queensland" value="EST-10" />
+	<zone name="Australia/South" value="CST-9:30CST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Sydney" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Tasmania" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/Victoria" value="EST-10EST,M10.1.0,M4.1.0/3" />
+	<zone name="Australia/West" value="WST-8" />
+	<zone name="Australia/Yancowinna" value="CST-9:30CST,M10.1.0,M4.1.0/3" />
+
+	<zone name="Brazil/Acre" value="ACT5" />
+	<zone name="Brazil/DeNoronha" value="FNT2" />
+	<zone name="Brazil/East" value="BRT3BRST,M10.2.0/0,M2.3.0/0" />
+	<zone name="Brazil/West" value="AMT4" />
+
+	<zone name="Canada/Atlantic" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="Canada/Central" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="Canada/Eastern" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="Canada/East-Saskatchewan" value="CST6" />
+	<zone name="Canada/Mountain" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="Canada/Newfoundland" value="NST3:30NDT,M3.2.0/0:01,M11.1.0/0:01" />
+	<zone name="Canada/Pacific" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="Canada/Saskatchewan" value="CST6" />
+	<zone name="Canada/Yukon" value="PST8PDT,M3.2.0,M11.1.0" />
+
+	<zone name="Chile/Continental" value="CLST" />
+	<zone name="Chile/EasterIsland" value="EASST" />
+
+	<zone name="Etc/GMT" value="GMT0" />
+	<zone name="Etc/GMT0" value="GMT0" />
+	<zone name="Etc/GMT-0" value="GMT0" />
+	<zone name="Etc/GMT+0" value="GMT0" />
+	<zone name="Etc/GMT-1" value="GMT-1" />
+	<zone name="Etc/GMT+1" value="GMT+1" />
+	<zone name="Etc/GMT-10" value="GMT-10" />
+	<zone name="Etc/GMT+10" value="GMT+10" />
+	<zone name="Etc/GMT-11" value="GMT-11" />
+	<zone name="Etc/GMT+11" value="GMT+11" />
+	<zone name="Etc/GMT-12" value="GMT-12" />
+	<zone name="Etc/GMT+12" value="GMT+12" />
+	<zone name="Etc/GMT-13" value="GMT-13" />
+	<zone name="Etc/GMT-14" value="GMT-14" />
+	<zone name="Etc/GMT-2" value="GMT-2" />
+	<zone name="Etc/GMT+2" value="GMT+2" />
+	<zone name="Etc/GMT-3" value="GMT-3" />
+	<zone name="Etc/GMT+3" value="GMT+3" />
+	<zone name="Etc/GMT-4" value="GMT-4" />
+	<zone name="Etc/GMT+4" value="GMT+4" />
+	<zone name="Etc/GMT-5" value="GMT-5" />
+	<zone name="Etc/GMT+5" value="GMT+5" />
+	<zone name="Etc/GMT-6" value="GMT-6" />
+	<zone name="Etc/GMT+6" value="GMT+6" />
+	<zone name="Etc/GMT-7" value="GMT-7" />
+	<zone name="Etc/GMT+7" value="GMT+7" />
+	<zone name="Etc/GMT-8" value="GMT-8" />
+	<zone name="Etc/GMT+8" value="GMT+8" />
+	<zone name="Etc/GMT-9" value="GMT-9" />
+	<zone name="Etc/GMT+9" value="GMT+9" />
+	<zone name="Etc/Greenwich" value="GMT0" />
+	<zone name="Etc/UCT" value="UCT0" />
+	<zone name="Etc/Universal" value="UTC0" />
+	<zone name="Etc/UTC" value="UTC0" />
+	<zone name="Etc/Zulu" value="UTC0" />
+
+	<zone name="Europe/Amsterdam" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Andorra" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Athens" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Belfast" value="GMT0BST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Belgrade" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Berlin" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Bratislava" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Brussels" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Bucharest" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Budapest" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Chisinau" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Copenhagen" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Dublin" value="GMT0IST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Gibraltar" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Guernsey" value="GMT0BST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Helsinki" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Isle_of_Man" value="GMT0BST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Istanbul" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Jersey" value="GMT0BST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Kaliningrad" value="EET-2EEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Kiev" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Lisbon" value="WET0WEST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Ljubljana" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/London" value="GMT0BST,M3.5.0/1,M10.5.0" />
+	<zone name="Europe/Luxembourg" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Madrid" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Malta" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Mariehamn" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Minsk" value="EET-2EEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Monaco" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Moscow" value="MSK-3MSD,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Nicosia" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Oslo" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Paris" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Podgorica" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Prague" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Riga" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Rome" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Samara" value="SAMT-4SAMST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/San_Marino" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Sarajevo" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Simferopol" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Skopje" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Sofia" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Stockholm" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Tallinn" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Tirane" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Tiraspol" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Uzhgorod" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Vaduz" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Vatican" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Vienna" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Vilnius" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Volgograd" value="VOLT-3VOLST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Warsaw" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Zagreb" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+	<zone name="Europe/Zaporozhye" value="EET-2EEST,M3.5.0/3,M10.5.0/4" />
+	<zone name="Europe/Zurich" value="CET-1CEST,M3.5.0,M10.5.0/3" />
+
+	<zone name="Indian/Antananarivo" value="EAT-3" />
+	<zone name="Indian/Chagos" value="IOT-6" />
+	<zone name="Indian/Christmas" value="CXT-7" />
+	<zone name="Indian/Cocos" value="CCT-6:30" />
+	<zone name="Indian/Comoro" value="EAT-3" />
+	<zone name="Indian/Kerguelen" value="TFT-5" />
+	<zone name="Indian/Mahe" value="SCT-4" />
+	<zone name="Indian/Maldives" value="MVT-5" />
+	<zone name="Indian/Mauritius" value="MUT-4" />
+	<zone name="Indian/Mayotte" value="EAT-3" />
+	<zone name="Indian/Reunion" value="RET-4" />
+
+	<zone name="Mexico/BajaNorte" value="PST8PDT,M4.1.0,M10.5.0" />
+	<zone name="Mexico/BajaSur" value="MST7MDT,M4.1.0,M10.5.0" />
+	<zone name="Mexico/General" value="CST6CDT,M4.1.0,M10.5.0" />
+
+	<zone name="Mideast/Riyadh87" value="zzz-3:07:04" />
+	<zone name="Mideast/Riyadh88" value="zzz-3:07:04" />
+	<zone name="Mideast/Riyadh89" value="zzz-3:07:04" />
+
+	<zone name="Pacific/Apia" value="WST11" />
+	<zone name="Pacific/Auckland" value="NZST-12NZDT,M9.5.0,M4.1.0/3" />
+	<zone name="Pacific/Chatham" value="CHAST-12:45CHADT,M9.5.0/2:45,M4.1.0/3:45" />
+	<zone name="Pacific/Easter" value="EASST" />
+	<zone name="Pacific/Efate" value="VUT-11" />
+	<zone name="Pacific/Enderbury" value="PHOT-13" />
+	<zone name="Pacific/Fakaofo" value="TKT10" />
+	<zone name="Pacific/Fiji" value="FJT-12" />
+	<zone name="Pacific/Funafuti" value="TVT-12" />
+	<zone name="Pacific/Galapagos" value="GALT6" />
+	<zone name="Pacific/Gambier" value="GAMT9" />
+	<zone name="Pacific/Guadalcanal" value="SBT-11" />
+	<zone name="Pacific/Guam" value="ChST-10" />
+	<zone name="Pacific/Honolulu" value="HST10" />
+	<zone name="Pacific/Johnston" value="HST10" />
+	<zone name="Pacific/Kiritimati" value="LINT-14" />
+	<zone name="Pacific/Kosrae" value="KOST-11" />
+	<zone name="Pacific/Kwajalein" value="MHT-12" />
+	<zone name="Pacific/Majuro" value="MHT-12" />
+	<zone name="Pacific/Marquesas" value="MART9:30" />
+	<zone name="Pacific/Midway" value="SST11" />
+	<zone name="Pacific/Nauru" value="NRT-12" />
+	<zone name="Pacific/Niue" value="NUT11" />
+	<zone name="Pacific/Norfolk" value="NFT-11:30" />
+	<zone name="Pacific/Noumea" value="NCT-11" />
+	<zone name="Pacific/Pago_Pago" value="SST11" />
+	<zone name="Pacific/Palau" value="PWT-9" />
+	<zone name="Pacific/Pitcairn" value="PST8" />
+	<zone name="Pacific/Ponape" value="PONT-11" />
+	<zone name="Pacific/Port_Moresby" value="PGT-10" />
+	<zone name="Pacific/Rarotonga" value="CKT10" />
+	<zone name="Pacific/Saipan" value="ChST-10" />
+	<zone name="Pacific/Samoa" value="SST11" />
+	<zone name="Pacific/Tahiti" value="TAHT10" />
+	<zone name="Pacific/Tarawa" value="GILT-12" />
+	<zone name="Pacific/Tongatapu" value="TOT-13" />
+	<zone name="Pacific/Truk" value="TRUT-10" />
+	<zone name="Pacific/Wake" value="WAKT-12" />
+	<zone name="Pacific/Wallis" value="WFT-12" />
+	<zone name="Pacific/Yap" value="TRUT-10" />
+
+	<zone name="SystemV/AST4" value="AST4" />
+	<zone name="SystemV/AST4ADT" value="AST4ADT,M3.2.0,M11.1.0" />
+	<zone name="SystemV/CST6" value="CST6" />
+	<zone name="SystemV/CST6CDT" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="SystemV/EST5" value="EST5" />
+	<zone name="SystemV/EST5EDT" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="SystemV/HST10" value="HST10" />
+	<zone name="SystemV/MST7" value="MST7" />
+	<zone name="SystemV/MST7MDT" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="SystemV/PST8" value="PST8" />
+	<zone name="SystemV/PST8PDT" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="SystemV/YST9" value="GAMT9" />
+	<zone name="SystemV/YST9YDT" value="AKST9AKDT,M3.2.0,M11.1.0" />
+
+	<zone name="US/Alaska" value="AKST9AKDT,M3.2.0,M11.1.0" />
+	<zone name="US/Aleutian" value="HAST10HADT,M3.2.0,M11.1.0" />
+	<zone name="US/Arizona" value="MST7" />
+	<zone name="US/Central" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="US/Eastern" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="US/East-Indiana" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="US/Hawaii" value="HST10" />
+	<zone name="US/Indiana-Starke" value="CST6CDT,M3.2.0,M11.1.0" />
+	<zone name="US/Michigan" value="EST5EDT,M3.2.0,M11.1.0" />
+	<zone name="US/Mountain" value="MST7MDT,M3.2.0,M11.1.0" />
+	<zone name="US/Pacific" value="PST8PDT,M3.2.0,M11.1.0" />
+	<zone name="US/Samoa" value="SST11" />
+    </timezones>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/tts_commandline.conf.xml b/data/freeswitch/conf/autoload_configs/tts_commandline.conf.xml
new file mode 100644
index 000000000..eb816431b
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/tts_commandline.conf.xml
@@ -0,0 +1,15 @@
+<configuration name="tts_commandline.conf" description="TextToSpeech Commandline configuration">
+    <settings>
+	<!--
+	Some variables will be replaced :
+	${text}: input text (quoted)
+	${rate}: sample rate (example: 8000)
+	${voice}: voice_name passed to TTS(quoted)
+	${file}: output file (quoted, including .wav extension)
+    
+    Example commands can be found at:
+    http://wiki.freeswitch.org/wiki/Mod_tts_commandline#Example_commands
+	-->
+	<param name="command" value="echo ${text} | text2wave -f ${rate} > ${file}"/>
+    </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/unicall.conf.xml b/data/freeswitch/conf/autoload_configs/unicall.conf.xml
new file mode 100644
index 000000000..eeaa0782f
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/unicall.conf.xml
@@ -0,0 +1,25 @@
+<configuration name="unicall.conf" description="Unicall Configuration">
+  <settings>
+    <param name="context" value="default"/>
+    <param name="dialplan" value="XML"/>
+    <param name="suppress-dtmf-tone" value="true"/>
+  </settings>
+  <spans>
+    <span id="1">
+      <param name="protocol-class" value="mfcr2"/>
+      <param name="protocol-variant" value="ar"/>
+      <param name="protocol-end" value="peer"/>
+      <param name="outgoing-allowed" value="true"/>
+      <param name="dialplan" value="XML"/>
+      <param name="context" value="default"/>
+    </span>
+    <span id="2">
+      <param name="protocol-class" value="mfcr2"/>
+      <param name="protocol-variant" value="ar"/>
+      <param name="protocol-end" value="peer"/>
+      <param name="outgoing-allowed" value="true"/>
+      <param name="dialplan" value="XML"/>
+      <param name="context" value="default"/>
+    </span>
+  </spans>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/unimrcp.conf.xml b/data/freeswitch/conf/autoload_configs/unimrcp.conf.xml
new file mode 100644
index 000000000..45dda798a
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/unimrcp.conf.xml
@@ -0,0 +1,23 @@
+<configuration name="unimrcp.conf" description="UniMRCP Client">
+  <settings>
+    <!-- UniMRCP profile to use for TTS -->
+    <param name="default-tts-profile" value="voxeo-prophecy8.0-mrcp1"/>
+    <!-- UniMRCP profile to use for ASR -->
+    <param name="default-asr-profile" value="voxeo-prophecy8.0-mrcp1"/>
+    <!-- UniMRCP logging level to appear in freeswitch.log.  Options are:
+         EMERGENCY|ALERT|CRITICAL|ERROR|WARNING|NOTICE|INFO|DEBUG -->
+    <param name="log-level" value="DEBUG"/>
+    <!-- Enable events for profile creation, open, and close -->
+    <param name="enable-profile-events" value="false"/>
+
+    <param name="max-connection-count" value="100"/>
+    <param name="offer-new-connection" value="1"/>
+    <param name="request-timeout" value="3000"/>
+  </settings>
+
+  <profiles>
+    <X-PRE-PROCESS cmd="include" data="../mrcp_profiles/*.xml"/>
+  </profiles>
+
+</configuration>
+
diff --git a/data/freeswitch/conf/autoload_configs/voicemail.conf.xml b/data/freeswitch/conf/autoload_configs/voicemail.conf.xml
new file mode 100644
index 000000000..ff4683675
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/voicemail.conf.xml
@@ -0,0 +1,70 @@
+<configuration name="voicemail.conf" description="Voicemail">
+  <settings>
+  </settings>
+  <profiles>
+    <profile name="default">
+      <param name="file-extension" value="wav"/>
+      <param name="terminator-key" value="#"/>
+      <param name="max-login-attempts" value="3"/>
+      <param name="digit-timeout" value="10000"/>
+      <param name="min-record-len" value="3"/>
+      <param name="max-record-len" value="300"/>
+      <param name="max-retries" value="3"/>
+      <param name="tone-spec" value="%(1000, 0, 640)"/>
+      <param name="callback-dialplan" value="XML"/>
+      <param name="callback-context" value="default"/>
+      <param name="play-new-messages-key" value="1"/>
+      <param name="play-saved-messages-key" value="2"/>
+      <param name="login-keys" value="0"/>
+      <param name="main-menu-key" value="0"/>
+      <param name="config-menu-key" value="5"/>
+      <param name="record-greeting-key" value="1"/>
+      <param name="choose-greeting-key" value="2"/>
+      <param name="change-pass-key" value="6"/>
+      <param name="record-name-key" value="3"/>
+      <param name="record-file-key" value="3"/>
+      <param name="listen-file-key" value="1"/>
+      <param name="save-file-key" value="2"/>
+      <param name="delete-file-key" value="7"/>
+      <param name="undelete-file-key" value="8"/>
+      <param name="email-key" value="4"/>
+      <param name="pause-key" value="0"/>
+      <param name="restart-key" value="1"/>
+      <param name="ff-key" value="6"/>
+      <param name="rew-key" value="4"/>
+      <param name="skip-greet-key" value="#"/>
+      <param name="previous-message-key" value="1"/>
+      <param name="next-message-key" value="3"/>
+      <param name="skip-info-key" value="*"/>
+      <param name="repeat-message-key" value="0"/>
+      <param name="record-silence-threshold" value="200"/>
+      <param name="record-silence-hits" value="2"/>
+      <param name="web-template-file" value="web-vm.tpl"/>
+      <param name="db-password-override" value="false"/>
+      <param name="allow-empty-password-auth" value="true"/>
+      <!-- if you need to change the sample rate of the recorded files e.g. gmail voicemail player -->
+      <!--<param name="record-sample-rate" value="11025"/>-->
+      <!-- the next two both must be set for this to be enabled
+           the extension is in the format of <dest> [<dialplan>] [<context>]
+       -->
+      <param name="operator-extension" value="operator XML default"/>
+      <param name="operator-key" value="9"/>
+      <param name="vmain-extension" value="vmain XML default"/>
+      <param name="vmain-key" value="*"/>
+      <!-- playback created files as soon as they were recorded by default -->
+      <!--<param name="auto-playback-recordings" value="true"/>-->
+      <email>
+	<param name="template-file" value="voicemail.tpl"/>
+	<param name="notify-template-file" value="notify-voicemail.tpl"/>
+	<!-- this is the format voicemail_time will have -->
+        <param name="date-fmt" value="%A, %B %d %Y, %I %M %p"/>
+        <param name="email-from" value="${voicemail_account}@${voicemail_domain}"/>
+      </email>
+      <!--<param name="storage-dir" value="/tmp"/>-->
+      <!--<param name="odbc-dsn" value="dsn:user:pass"/>-->
+      <!--<param name="record-comment" value="Your Comment"/>-->
+      <!--<param name="record-title" value="Your Title"/>-->
+      <!--<param name="record-copyright" value="Your Copyright"/>-->
+    </profile>
+  </profiles>
+</configuration> 
diff --git a/data/freeswitch/conf/autoload_configs/voicemail_ivr.conf.xml b/data/freeswitch/conf/autoload_configs/voicemail_ivr.conf.xml
new file mode 100644
index 000000000..1cdf3c222
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/voicemail_ivr.conf.xml
@@ -0,0 +1,211 @@
+<configuration name="voicemail_ivr.conf" description="Voicemail IVR">
+<profiles>
+	<profile name="default">
+		<settings>
+			<param name="IVR-Maximum-Attempts" value="3" />
+			<param name="IVR-Entry-Timeout" value="3000" />
+			<param name="Record-Format" value="wav" />
+			<!--<param name="Record-Sample-Rate" value="8000" />-->
+			<param name="Record-Silence-Hits" value="4" />
+			<param name="Record-Silence-Threshold" value="200" />
+			<param name="Record-Maximum-Length" value="30" />
+			<!--<param name="Record-Minimum-Length" value="3" />-->
+			<param name="Exit-Purge" value="true" />
+			<param name="Password-Mask" value="XXX." />
+			<param name="User-Mask" value="X." />
+
+		</settings>
+		<apis>
+			<api name="auth_login" value="vm_fsdb_auth_login" />
+			<api name="msg_list" value="vm_fsdb_msg_list" />
+			<api name="msg_count" value="vm_fsdb_msg_count" />
+			<api name="msg_delete" value="vm_fsdb_msg_delete" />
+			<api name="msg_undelete" value="vm_fsdb_msg_undelete" />
+			<api name="msg_save" value="vm_fsdb_msg_save" />
+			<api name="msg_purge" value="vm_fsdb_msg_purge" />
+			<api name="msg_get" value="vm_fsdb_msg_get" />
+			<api name="msg_forward" value="vm_fsdb_msg_forward" />
+			<api name="pref_greeting_set" value="vm_fsdb_pref_greeting_set" />
+			<api name="pref_greeting_get" value="vm_fsdb_pref_greeting_get" />
+			<api name="pref_recname_set" value="vm_fsdb_pref_recname_set" />
+			<api name="pref_password_set" value="vm_fsdb_pref_password_set" />
+		</apis>
+		<menus>
+			<menu name="std_authenticate">
+			<phrases>
+				<phrase name="fail_auth" value="fail_auth@voicemail_ivr" />
+			</phrases>
+			<keys>
+			</keys>
+			</menu>
+
+			<menu name="std_authenticate_ask_user">
+			<phrases>
+				<phrase name="instructions" value="enter_id@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="#" action="ivrengine:terminate_entry" variable="VM-Key-Terminator" />
+			</keys>
+			</menu>
+
+			<menu name="std_authenticate_ask_password">
+			<phrases>
+				<phrase name="instructions" value="enter_pass@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="#" action="ivrengine:terminate_entry" variable="VM-Key-Terminator" />
+			</keys>
+			</menu>
+
+			<menu name="std_main_menu">
+			<settings>
+				<param name="Action-On-New-Message" value="new_msg:std_navigator" />
+			</settings>
+			<phrases>
+				<phrase name="msg_count" value="message_count@voicemail_ivr" />
+				<phrase name="say_date" value="say_date_event@voicemail_ivr" />
+				<phrase name="say_msg_number" value="say_message_number@voicemail_ivr" />
+				<phrase name="menu_options" value="menu@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="new_msg:std_navigator" variable="VM-Key-Play-New-Messages" />
+				<key dtmf="2" action="saved_msg:std_navigator" variable="VM-Key-Play-Saved-Messages" />
+				<key dtmf="5" action="menu:std_preference" variable="VM-Key-Config-Menu"/>
+				<key dtmf="#" action="return" variable="VM-Key-Terminator" />
+			</keys>
+			</menu>
+
+			<menu name="std_navigator">
+			<settings>
+				<!--<param name="Nav-Action-On-Delete" value="next_msg" />-->
+			</settings>
+			<phrases>
+				<phrase name="msg_count" value="message_count@voicemail_ivr" />
+				<phrase name="say_date" value="say_date_event@voicemail_ivr" />
+				<phrase name="say_msg_number" value="say_message_number@voicemail_ivr" />
+				<phrase name="menu_options" value="listen_file_check@voicemail_ivr" />
+				<phrase name="ack" value="ack@voicemail_ivr" />
+				<phrase name="play_message" value="play_message@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="skip_intro" variable="VM-Key-Main-Listen-File" />
+				<key dtmf="6" action="next_msg" variable="VM-Key-Main-Next-Msg" />
+				<key dtmf="4" action="prev_msg" />
+				<key dtmf="7" action="delete_msg" variable="VM-Key-Main-Delete-File" /> <!-- Same key for undelete if it already deleted -->
+				<key dtmf="8" action="menu:std_forward" variable="VM-Key-Main-Forward" />
+				<key dtmf="2" action="save_msg" variable="VM-Key-Main-Save-File" />
+				<key dtmf="5" action="callback" variable="VM-Key-Main-Callback" />
+				<key dtmf="#" action="return" /> <!-- TODO Might Conflict with future fast-forward -->
+			</keys>
+			</menu>
+
+			<menu name="std_preference">
+			<phrases>
+				<phrase name="menu_options" value="config_menu@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="menu:std_record_greeting_with_slot" variable="VM-Key-Record-Greeting" />
+				<key dtmf="2" action="menu:std_select_greeting_slot" variable="VM-Key-Choose-Greeting" />
+				<key dtmf="3" action="menu:std_record_name" variable="VM-Key-Record-Name" />
+				<key dtmf="6" action="menu:std_set_password" variable="VM-Key-Change-Password" />
+				<key dtmf="0" action="return" variable="VM-Key-Main-Menu" />
+			</keys>
+			</menu>
+
+			<menu name="std_record_greeting">
+			<phrases>
+				<phrase name="instructions" value="record_greeting@voicemail_ivr" />
+				<phrase name="play_recording" value="play_recording@voicemail_ivr" />
+				<phrase name="menu_options" value="record_file_check@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="listen" variable="VM-Key-Listen-File" />
+				<key dtmf="2" action="save" variable="VM-Key-Save-File" />
+				<key dtmf="4" action="rerecord" variable="VM-Key-ReRecord-File" />
+				<key dtmf="#" action="skip_instruction" />
+			</keys>
+			</menu>
+
+
+			<menu name="std_record_name">
+			<phrases>
+				<phrase name="instructions" value="record_name@voicemail_ivr" />
+				<phrase name="play_recording" value="play_recording@voicemail_ivr" />
+				<phrase name="menu_options" value="record_file_check@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="listen" variable="VM-Key-Listen-File" />
+				<key dtmf="2" action="save" variable="VM-Key-Save-File" />
+				<key dtmf="4" action="rerecord" variable="VM-Key-ReRecord-File" />
+				<key dtmf="#" action="skip_instruction" />
+			</keys>
+			</menu>
+
+			<menu name="std_record_message">
+			<phrases>
+				<phrase name="instructions" value="record_message@voicemail_ivr" />
+				<phrase name="play_recording" value="play_recording@voicemail_ivr" />
+				<phrase name="menu_options" value="record_file_check@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="listen" variable="VM-Key-Listen-File" />
+				<key dtmf="2" action="save" variable="VM-Key-Save-File" />
+				<key dtmf="4" action="rerecord" variable="VM-Key-ReRecord-File" />
+				<key dtmf="#" action="skip_instruction" />
+			</keys>
+			</menu>			
+
+			<menu name="std_forward_ask_prepend">
+			<phrases>
+				<phrase name="menu_options" value="forward_ask_prepend@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="1" action="prepend" variable="VM-Key-Prepend" />
+				<key dtmf="8" action="forward" variable="VM-Key-Forward" />
+				<key dtmf="#" action="return" variable="VM-Key-Return" />
+			</keys>
+			</menu>
+
+			<menu name="std_forward_ask_extension">
+			<phrases>
+				<phrase name="instructions" value="forward_ask_extension@voicemail_ivr" />
+				<phrase name="ack" value="ack@voicemail_ivr" />
+				<phrase name="invalid_extension" value="invalid_extension@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="#" action="ivrengine:terminate_entry" variable="VM-Key-Terminator" />
+			</keys>
+			</menu>
+
+			<menu name="std_select_greeting_slot">
+			<phrases>
+				<phrase name="instructions" value="choose_greeting@voicemail_ivr" />
+				<phrase name="invalid_slot" value="choose_greeting_fail@voicemail_ivr" />
+				<phrase name="selected_slot" value="greeting_selected@voicemail_ivr" />
+			</phrases>
+			<keys>
+			</keys>
+			</menu>
+
+			<menu name="std_record_greeting_with_slot">
+			<phrases>
+				<phrase name="instructions" value="choose_greeting@voicemail_ivr" />
+			</phrases>
+			<keys>
+			</keys>
+			</menu>
+
+			<menu name="std_set_password">
+			<phrases>
+				<phrase name="instructions" value="enter_pass@voicemail_ivr" />
+			</phrases>
+			<keys>
+				<key dtmf="#" action="ivrengine:terminate_entry" variable="VM-Key-Terminator" />
+			</keys>
+			</menu>
+		</menus>
+	</profile>
+</profiles>
+</configuration>
+
+
diff --git a/data/freeswitch/conf/autoload_configs/xml_cdr.conf.xml b/data/freeswitch/conf/autoload_configs/xml_cdr.conf.xml
new file mode 100644
index 000000000..e546e6f43
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/xml_cdr.conf.xml
@@ -0,0 +1,71 @@
+<configuration name="xml_cdr.conf" description="XML CDR CURL logger">
+  <settings>
+    <!-- the url to post to if blank web posting is disabled  -->
+    <param name="url" value="http://localhost/cdr_curl/post.php"/>
+
+    <!-- optional: credentials to send to web server -->
+    <!--    <param name="cred" value="user:pass"/> -->
+
+    <!-- the total number of retries (not counting the first 'try') to post to webserver incase of failure -->
+    <!-- <param name="retries" value="2"/> -->
+
+    <!-- delay between retries in seconds, default is 5 seconds -->
+    <!-- <param name="delay" value="1"/> -->
+
+    <!-- Log via http and on disk, default is false -->
+    <param name="log-http-and-disk" value="true"/>
+
+    <!-- optional: if not present we do not log every record to disk -->
+    <!-- either an absolute path, a relative path assuming ${prefix}/logs or a blank value will default to ${prefix}/logs/xml_cdr -->
+    <param name="log-dir" value=""/>
+
+    <!-- optional: if not present we do log the b leg -->
+    <!-- true or false if we should create a cdr for the b leg of a call-->
+    <param name="log-b-leg" value="false"/>
+    
+    <!-- optional: if not present, all filenames are the uuid of the call -->
+    <!-- true or false if a leg files are prefixed "a_" -->
+    <param name="prefix-a-leg" value="true"/>
+
+    <!-- encode the post data may be 'true' for url encoding, 'false' for no encoding, 'base64' for base64 encoding or 'textxml' for text/xml -->
+    <param name="encode" value="true"/>
+
+    <!-- optional: set to true to disable Expect: 100-continue lighttpd requires this setting --> 
+    <!--<param name="disable-100-continue" value="true"/>--> 
+    
+    <!-- optional: full path to the error log dir for failed web posts if not specified its the same as log-dir -->
+    <!-- either an absolute path, a relative path assuming ${prefix}/logs or a blank or omitted value will default to ${prefix}/logs/xml_cdr -->
+    <!-- <param name="err-log-dir" value="/tmp"/> -->
+
+    <!-- which auhtentification scheme to use. Supported values are: basic, digest, NTLM, GSS-NEGOTIATE or "any" for automatic detection -->
+    <!--<param name="auth-scheme" value="basic"/>--> 
+
+    <!-- optional: this will enable the CA root certificate check by libcurl to
+         verify that the certificate was issued by a major Certificate Authority.
+         note: default value is disabled. only enable if you want this! -->
+    <!--<param name="enable-cacert-check" value="true"/>-->
+    <!-- optional: verify that the server is actually the one listed in the cert -->
+    <!-- <param name="enable-ssl-verifyhost" value="true"/> -->
+
+    <!-- optional: these options can be used to specify custom SSL certificates
+         to use for HTTPS communications. Either use both options or neither.
+         Specify your public key with 'ssl-cert-path' and the private key with
+         'ssl-key-path'. If your private key has a password, specify it with
+         'ssl-key-password'. -->
+    <!-- <param name="ssl-cert-path" value="$${base_dir}/conf/certs/public_key.pem"/> -->
+    <!-- <param name="ssl-key-path" value="$${base_dir}/conf/certs/private_key.pem"/> -->
+    <!-- <param name="ssl-key-password" value="MyPrivateKeyPassword"/> -->
+
+    <!-- optional: use a custom CA certificate in PEM format to verify the peer
+         with. This is useful if you are acting as your own certificate authority.
+         note: only makes sense if used in combination with "enable-cacert-check." -->
+    <!-- <param name="ssl-cacert-file" value="$${base_dir}/conf/certs/cacert.pem"/> -->
+
+    <!-- optional: specify the SSL version to force HTTPS to use. Valid options are
+         "SSLv3" and "TLSv1". Otherwise libcurl will auto-negotiate the version. -->
+    <!-- <param name="ssl-version" value="TLSv1"/> -->
+
+    <!-- optional: enables cookies and stores them in the specified file. -->
+    <!-- <param name="cookie-file" value="/tmp/cookie-mod_xml_curl.txt"/> -->
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/xml_curl.conf.xml b/data/freeswitch/conf/autoload_configs/xml_curl.conf.xml
new file mode 100644
index 000000000..30951d83c
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/xml_curl.conf.xml
@@ -0,0 +1,49 @@
+<configuration name="xml_curl.conf" description="cURL XML Gateway">
+  <bindings>
+    <binding name="example">
+      <!-- Allow to bind on a particular IP for requests sent -->
+      <!--<param name="bind-local" value="$${local_ip_v4}" />-->
+      <!-- The url to a gateway cgi that can generate xml similar to
+	   what's in this file only on-the-fly (leave it commented if you dont
+	   need it) -->
+      <!-- one or more |-delim of configuration|directory|dialplan -->
+      <!-- <param name="gateway-url" value="http://www.freeswitch.org/gateway.xml" bindings="dialplan"/> -->
+      <!-- set this to provide authentication credentials to the server -->
+      <!--<param name="gateway-credentials" value="muser:mypass"/>-->
+      <!--<param name="auth-scheme" value="basic"/>-->
+
+      <!-- optional: this will enable the CA root certificate check by libcurl to
+           verify that the certificate was issued by a major Certificate Authority.
+           note: default value is disabled. only enable if you want this! -->
+      <!--<param name="enable-cacert-check" value="true"/>-->
+      <!-- optional: verify that the server is actually the one listed in the cert -->
+      <!-- <param name="enable-ssl-verifyhost" value="true"/> -->
+
+      <!-- optional: these options can be used to specify custom SSL certificates
+           to use for HTTPS communications. Either use both options or neither.
+           Specify your public key with 'ssl-cert-path' and the private key with
+           'ssl-key-path'. If your private key has a password, specify it with
+           'ssl-key-password'. -->
+      <!-- <param name="ssl-cert-path" value="$${base_dir}/conf/certs/public_key.pem"/> -->
+      <!-- <param name="ssl-key-path" value="$${base_dir}/conf/certs/private_key.pem"/> -->
+      <!-- <param name="ssl-key-password" value="MyPrivateKeyPassword"/> -->
+      <!-- optional timeout -->
+      <!-- <param name="timeout" value="10"/> -->
+
+      <!-- optional: use a custom CA certificate in PEM format to verify the peer
+           with. This is useful if you are acting as your own certificate authority.
+           note: only makes sense if used in combination with "enable-cacert-check." -->
+      <!-- <param name="ssl-cacert-file" value="$${base_dir}/conf/certs/cacert.pem"/> -->
+
+      <!-- optional: specify the SSL version to force HTTPS to use. Valid options are
+           "SSLv3" and "TLSv1". Otherwise libcurl will auto-negotiate the version. -->
+      <!-- <param name="ssl-version" value="TLSv1"/> -->
+
+      <!-- optional: enables cookies and stores them in the specified file. -->
+      <!-- <param name="cookie-file" value="/tmp/cookie-mod_xml_curl.txt"/> -->
+
+      <!-- one or more of these imply you want to pick the exact variables that are transmitted -->
+      <!--<param name="enable-post-var" value="Unique-ID"/>-->
+    </binding>
+  </bindings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/xml_rpc.conf.xml b/data/freeswitch/conf/autoload_configs/xml_rpc.conf.xml
new file mode 100644
index 000000000..714a90990
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/xml_rpc.conf.xml
@@ -0,0 +1,10 @@
+<configuration name="xml_rpc.conf" description="XML RPC">
+  <settings>
+    <!-- The port where you want to run the http service (default 8080) -->
+    <param name="http-port" value="8080"/>
+    <!-- if all 3 of the following params exist all http traffic will require auth -->
+    <param name="auth-realm" value="freeswitch"/>
+    <param name="auth-user" value="freeswitch"/>
+    <param name="auth-pass" value="works"/>
+  </settings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/xml_scgi.conf.xml b/data/freeswitch/conf/autoload_configs/xml_scgi.conf.xml
new file mode 100644
index 000000000..b9662d163
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/xml_scgi.conf.xml
@@ -0,0 +1,12 @@
+<configuration name="xml_scgi.conf" description="SCGI XML Gateway">
+  <bindings>
+    <binding name="example">
+      <!-- one or more |-delim of configuration|directory|dialplan -->
+      <!-- <param name="host" value="127.0.0.1" bindings="dialplan"/> -->
+      <!-- <param name="port" value="8080"/> -->
+      <!-- <param name="timeout" value="10"/> -->
+      <!-- one or more of these imply you want to pick the exact variables that are transmitted -->
+      <!--<param name="enable-post-var" value="Unique-ID"/>-->
+    </binding>
+  </bindings>
+</configuration>
diff --git a/data/freeswitch/conf/autoload_configs/zeroconf.conf.xml b/data/freeswitch/conf/autoload_configs/zeroconf.conf.xml
new file mode 100644
index 000000000..84c1a4617
--- /dev/null
+++ b/data/freeswitch/conf/autoload_configs/zeroconf.conf.xml
@@ -0,0 +1,6 @@
+<configuration name="zeroconf.conf" description="Zeroconf Event Handler">
+  <settings>
+    <param name="publish" value="yes"/>
+    <param name="browse" value="_sip._udp"/>
+  </settings>
+</configuration>
diff --git a/docs/tutfreeswitch.rst b/docs/tutfreeswitch.rst
index e646f84f0..2aa124517 100644
--- a/docs/tutfreeswitch.rst
+++ b/docs/tutfreeswitch.rst
@@ -62,7 +62,7 @@ To get CGRateS installed and configured, we have executed the following commands
  wget http://apt.itsyscom.com/repos/apt/conf/cgrates.apt.list
  apt-get update
  apt-get install cgrates
- cd /usr/share/cgrates/data/rates/prepaid1centpsec/
+ cd /usr/share/cgrates/data/tariffplans/prepaid1centpsec/
  cgr-loader
  cd /etc/cgrates/
  cp /usr/share/cgrates/data/conf/cgr_fs_prep_csv.cfg cgrates.cfg